Abs Lighting

The low profile series 4100 provides under-deck and wall-mounting options for easy installation in tunnels, underpasses, parking garages, train and subway stations. Available with type ii and v beam patterns, this durable fixture has received dot approval in several municipalities. construction features

housing: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
lens/door assembly: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the tempered thermal and shock resistant borosilicate glass, sealed to the housing with high temperature, medium density, closed cell silicone gasket. Door frame attached and secured by stainless steel cam fasteners, which operate without the use of tools, for ease of relamping.
reflector: electropolished and anodized high purity aluminum, coilzak or equivalent.
electrical power tray: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Ballast secured to a removable ballast tray for ease of service
ballast: constant wattage autotransformer (cwa) core & coil ballast. Available in 120, 208, 240, 277 or 480 volt, and multi-tap (120/208/240/277), prewired to 6" leads for field connection.
mounting: heavy gauge aluminum brackets with aiming indicator marked in 15° increments.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. Please consult the factory for availability.

The series 11000 is the shoebox you need to complete your project’s lighting package. Once the optics of abs lighting’s precision floods are specified, the 11000 is ideal for lighting your roadways, parking lots, courtyards and pedestrian areas. construction features

housing: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
lens/door assembly: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the tempered thermal and shock resistant borosilicate glass, sealed to the housing with high temperature, medium density, closed cell silicone gasket. Door frame secured by stainless steel captive screws. Door assembly secured to housing with full length continuous hinge.
reflector: electropolished and anodized high purity aluminum, coilzak or equivalent.
ballast: constant wattage autotransformer (cwa) core & coil ballast. Available in 120, 208, 240, 277 or 480 volt, and multi-tap (120/208/240/277). Ballast secured to a removable hinged door for ease of service. Supplied pre-wired to power leads inside the fixture.
mounting: supplied with 8" arm, bolster plate for inside of fixture, threaded rod, pole support plate and necessary hardware for square pole mounting (round pole mounting arm is available, please consult factory).
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. Please consult the factory for availability.
ul listed: suitable for wet locations. Ul1598

The attractive Series 6000 indirect fixture provides evenly distributed up-lighting with no glare or shadows. Available in square or round, single or twin, with symmetrical or asymmetrical beam patterns, these unique fixtures are ideal for schools, offices and retail outlets. Construction Features

Model Configurations: The Series 6000 is available in three configurations; Round, Square and Twin Square.
Housing: Constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded, unitized and ground for a smooth exterior surface.
Lens/Door Assembly: Constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the tempered thermal and shock resistant borosilicate glass. Lens assembly sealed to the housing with high temperature, medium density, closed cell silicone gasket for dust protection. Round Single units with standard single stem mounting are equipped with lift and shift door assemblies. Door assembly on all other units is secured by captive screw and full-length, continuous hinge.
Reflector: Electropolished and anodized high purity aluminum, coilzak or equivalent.
Ballast: Constant Wattage Autotransformer (CWA) Core & Coil ballast. Available in 120, 208, 240, 277 or 480 volt, and Multi-Tap (120/208/240/277). Supplied prewired to power leads to extend 12" beyond fixture mounting. Note: 1000 Watt Metal Halide available with remote ballast only.
Mounting: Round Units include a single 3/8" ID steel stem with canopy, aligner ball and mounting bracket allowing 42° maximum swivel. Square units are available with dual-stem mount (four-stem for twins), wall-mount, partition-mount, and gondola-mount options.
Hardware: All external hardware is stainless steel, aluminum or hot dip galvanized.
Finish: Polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include textured white, black, bronze and silver. Custom color matching is also available. Please consult the factory for availability.
UL Listed: UL1598

The series 3000 combines an asymmetrical beam pattern with an optional internal louver system that provides precise vertical cut-off. This faa approved fixture is ideal for airport aprons, parking lots, signage and other applications where light pollution is a concern. construction features

housing: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
lens/door assembly: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the tempered thermal and shock resistant borosilicate glass, sealed to the housing with high temperature, medium density, closed cell silicone gasket. Door frame attached and secured by stainless steel cam fasteners, which operate without the use of tools, for ease of relamping.
reflector: asymmetrical reflector system of electropolished and anodized high purity aluminum, coilzak or equivalent. Spring loading of the reflector assures precise beam control with allowance for expansion and contraction cycles. Standard internal louver provides shielding of the lamp’s arc tube.
electrical power tray: constructed of heavy gauge, die- formed, 5052 aluminum, with less than 1% copper content. Ballast secured to the removable power tray for ease of service.
ballast: constant wattage autotransformer (cwa) core & coil ballast. Available in 120, 208, 240, 277 or 480 volt, and multi-tap (120/208/240/277). Supplied prewired to three feet of 16/3 stw-a cord. Cord is secured to enclosure with a watertight strain relief. note: all multi-tap ballasts wired to 277v.
mounting: heavy gauge, die-formed hot rolled steel yoke. available with optional almag cast aluminum alloy slipfitter (sf), for standard 2 inch pole tenon mounting (23? 8" od) by others.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. please consult the factory for availability.

The series 3100 features a spun reflector for maximizing light levels or projecting over long distances. A variety of optical patterns provide precision control of the pulse start or metal halide light source. The 3100 is ideal for monuments, building facades, steeples, or anywhere an architectural element needs to be noticed. construction features

housing: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
lens/door assembly: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the tempered thermal and shock resistant borosilicate glass sealed to the housing with high temperature, medium density, closed cell silicone gasket. Door frame attached and secured by stainless steel cam fasteners, which operate without the use of tools, for ease of relamping.
reflector: horizontal or vertical spot reflector system of electropolished and anodized high purity aluminum, coilzak or equivalent.
electrical power tray: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Ballast secured to the removable power tray for ease of service.
ballast: constant wattage autotransformer (cwa) core & coil ballast. Available in 120, 208, 240, 277 or 480 volt, and multi-tap (120/208/240/277). Supplied prewired to three feet of 16/3 stw-a cord. Cord is secured to enclosure with a watertight strain relief. note: all multi-tap ballasts wired to 277v.
mounting: heavy gauge, die-formed hot rolled steel yoke. available with optional almag cast aluminum alloy slipfitter (sf), for standard 2 inch pole tenon mounting (23? 8" od) by others.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. please consult the factory for availability.
ul listed: suitable for wet locations. Ul1598

The series 4000 combines the efficiency and long life of low pressure sodium with several roadway optical packages to choose from. The monochromatic light source is ideal for nature-safe installations, meeting dark sky ordinances and lighting areas utilizing surveillance cameras. Popular applications include loading docks, seashore installations, observatories, and perimeters of secure locations. construction features

housing: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
lens/door assembly: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the clear polycarbonate lens, sealed to the housing with medium density, closed cell pure neoprene gasket. Door frame attached and secured by stainless steel cam fasteners, which operate without the use of tools, for ease of relamping.
reflector: electropolished and anodized high purity aluminum, coilzak or equivalent. Stainless steel lamp support maintains precise alignment of the lamp to the reflector.
ballast: constant wattage autotransformer (cwa) core & coil ballast. Available in 120, 208, 240, 277 or 480 volt, and dual-tap (120/240 or 208/277). Fixtures with yoke mounting supplied prewired to three feet of 16/3 stw-a cord. Cord is secured to enclosure with a watertight strain relief. Fixtures with knuckle slipfitter mounting supplied prewired to power leads inside fitter’s wiring compartment.
mounting: heavy gauge, die-formed hot rolled steel yoke. available with optional almag cast aluminum alloy slipfitter (sf), for standard 2 inch pole tenon mounting (2-3? 8" od) by others.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. Please consult the factory for availability.
ul listed: suitable for wet locations. Ul1598

The series 7100 is the perfect solution for your high wattage quartz needs. With two asymmetric and three twin beam optical patterns to choose from, this fixture can be used to wash monuments and facades of all shapes and sizes. The 7100 is also ideal for down- lighting to provide clean-up or emergency lighting in arenas and convention halls. construction features

housing: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
lens/door assembly: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the tempered thermal and shock resistant borosilicate glass, sealed to the housing with high temperature, medium density, closed cell silicone gasket. Door frame attached and secured by stainless steel cam fasteners, which operate without the use of tools, for ease of relamping.
reflector: electropolished and anodized high purity aluminum, coilzak or equivalent.
electrical: socket is prewired to three feet of 16/3 stw-a cord. Cord is secured to housing with a watertight strain relief.
mounting: heavy gauge, die-formed hot rolled steel yoke.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. Please consult the factory for availability.
ul listed: suitable for wet locations. Ul1598

The wall-mounted series 6100 indoor, indirect fixture provides an asymmetric beam pattern and tilt adjustability for evenly lit interior spaces. Popular applications include civic centers, schools, airport terminals, office buildings and indoor swimming facilities. construction features

housing: constructed of roll-formed and laser cut, heavy gauge 5052 aluminum, with less than 1% copper content. Seams are continuously welded, unitized and ground for a smooth exterior surface.
lens assembly: lift and shift lens frame constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content secures the thermal and shock resistant borosilicate glass. Lens assembly sealed to the housing with high temperature, medium density, closed cell silicone gasket for dust protection.
reflector: electropolished and anodized high purity aluminum, coilzak or equivalent.
ballast: remote mounted protected dual-volt (120/277) f-can ballast, with automatic resetting thermal protection and wire compartment.
mounting: adjustable yoke mount constructed of die-formed aluminum. Formed junction box cover included.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include textured white, black, bronze and silver. Custom color matching is also available. Please consult the factory for availability.
ul listed: ul1598

Housing: Upper Housing—Constructed of heavy, 12-gauge high purity spun aluminum.
Lower Housing—Cast aluminum, high tensile strength ALMAG-35 with .04% copper free aluminum. Provides 355° fixture rotation. Degree markers are cast into base for precision horizontal orientation. Housing is sealed to base with high temperature gasket to ensure water tight seal.
Lens/Door Assembly: Constructed of 12-gauge high purity spun aluminum equipped with three low profile stainless steel cam fasteners for positive locking and re-lamping without tools. Thermal shock resistant optical lens is mounted with ring retainer and high temperature silicone gasket with no compression set feature. Lens surface is flush to outside of cover to eliminate water collecting on the lens. Lens cover assembly is sealed to upper housing with high temperature closed cell silicone gasket to ensure water and dust tight seal.
Reflector: Electropolished and anodized high purity aluminum Alzak, Coilzak or equivalent. Metal halide optical systems equipped with G-12 bi-pin socket for T-6 MH lamps.
Ballast: Electronic HID Metal Halide ballast offers superior color uniformity, extended lamp life, consistent lamp lumen output and significant energy savings. Ballast has thermal protection and remote mounting capability up to 50' without additional igniter. Ballast is mounted inside base, available in 120 through 277 volt.
Mounting:
Base—Offers three-point mounting, designed for direct wall mount or concrete base mount. Base has 1/2" NPT feature for both rigid and flexible conduit. Remote ballast option is available.
Integral Yoke—Laser cut, 8-gauge aluminum yoke with 5° markers for precision vertical aiming. Six standard designs available. Custom patterns can be designed upon request.
Hardware: All external hardware is 300 series stainless steel.
Finish: Polyester TGIL textured powder coat finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. RAL and custom color matching is also available. Please consult factory for availability.
UL Listed: Suitable for wet locations. UL1598 rated.

Housing: One piece 24" diameter spherical housing constructed of high purity 12 Ga. aluminum.
Lens/Door Assembly: Lens and door frame assembly constructed of high purity 12 Ga. aluminum with tempered thermal and shock resistant glass sealed to housing with high temperature silicone. Door frame is sealed to housing with a single piece high temperature silicone ring gasket with no compression set feature. Door frame attached and secured with high tensile strength cast aluminum hinge and (4) cam fasteners which operate without the use of tools for easy re-lamping.
Reflector: Rigid (4) point location frame to secure horizontal, vertical or axial spot 17" diameter reflector systems. Reflectors to be made of high grade electro-polished and anodized Alzak aluminum. The standard lamp holder shall be firmly mounted with heavy gauge socket bracket to insure proper focal point to reflector system. The standard lamp holder shall be mogul base, 4KV rated socket with stainless steel lamp shell and grips. Optical assembly features polarized connector for connection to ballast power pack assembly.
Electrical Power Tray: Integral mounted and pre-wired CWA core and coil ballast tray assembly. Available in 120, 208, 240, 277 or 480 volt 60 Hz, and Multi-Tap up to 480 volt. Supplied pre-wired with polarized line and socket ends for ease of field replacement of the ballast assembly. Unit supplied with four feet of 16/3 STW-A cord. Cord is secured to enclosure with a watertight strain relief. Note: All multi-tap ballasts wired to highest rated voltage.
Mounting: Heavy gauge die formed gimbal yoke with Almag 35 cast aluminum alloy slipfitter with internal wiring compartment and watertight cover. Fitter to have two point and through bolt mount, all high grade stainless steel, for standard 2 inch pole tenon mounting (2 3⁄8" OD) by others. Gimbal assembly feature allows for unit aiming and tilt to 340 degrees with locking bolts each side
Hardware: All external hardware is stainless steel, aluminum or hot dip galvanized.
Finish: Polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom colors (RAL) and matching is also available. Please consult the factory for availability. Suitable for wet locations. UL1598

Housing: one piece 31" diameter, spherical housing constructed of high purity 12 ga. Aluminum.
lens/door assembly: lens and door frame assembly constructed of high purity 12 ga. Aluminum with tempered thermal and shock resistant glass, sealed to housing with high temperature silicone. Door frame is sealed to housing with a single piece high temperature silicone ring gasket with no compression set feature. Door frame is attached and secured with high tensile strength cast aluminum hinge and four cam fasteners, which operate without the use of tools for easy re-lamping.
reflector: rigid 4-point location frame to secure horizontal, vertical or axial spot reflector systems. Reflectors to be made of high grade electro-polished and anodized alzak aluminum. The standard lamp holder shall be firmly mounted with heavy gauge socket bracket to insure proper focal point to reflector system. The standard lamp holder shall be mogul base, 5kv rated socket with stainless steel lamp shell and grips. Optical assembly features polarized connector for connection to ballast power pack assembly.
electrical power tray: integral mounted and pre-wired cwa core and coil ballast tray assembly. Available in 120, 208, 240, 277 or 480 volt 60 hz, and multi-tap up to 480 volt. Supplied pre-wired with polarized line and socket ends for ease of field replacement of the ballast assembly. Unit supplied with four feet of 16/3 stw-a cord. Cord is secured to enclosure with a watertight strain relief. Unless noted, all multi-tap ballasts wired to highest rated voltage.
mounting: heavy gauge die-formed gimbal yoke with almag 35 cast aluminum alloy slipfitter with internal wiring compartment and watertight cover. Fitter to have two point and through bolt mount, all high grade stainless steel, for standard 2 inch pole tenon mounting (2 3⁄8" od) by others. Gimbal assembly feature allows for unit aiming and tilt to 340° along the vertical axis and 160° along the horizontal axis, the center point remaining in a fixed position with locking bolts each side.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester tgil textured powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom colors (ral) and matching is also available. Please consult the factory for availability.
ul listed: suitable for wet locations. Ul1598

Housing: Constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
Lens/Door Assembly: Constructed of heavy gauge, die- formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the tempered thermal and shock resistant Borosilicate glass, sealed to the housing with high temperature, medium density, closed cell silicone gasket. Door frame attached and secured by stainless steel cam fasteners, which operate without the use of tools, for ease of relamping.
Reflector: Electropolished and anodized high purity aluminum, coilzak or equivalent.
Electrical Power Tray: Constructed of heavy gauge, die- formed, 5052 aluminum, with less than 1% copper content. Ballast secured to a removable ballast tray for ease of service
Ballast: Constant Wattage Autotransformer (CWA) Core & Coil ballast. Available in 120, 208, 240, 277 or 480 volt, and Multi-Tap (120/208/240/277), prewired to 6" leads for field connection.
Mounting: Heavy gauge aluminum brackets with aiming indicator marked in 15° increments.
Hardware: All external hardware is stainless steel, aluminum or hot dip galvanized.
Finish: Polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. Please consult the factory for availability.

Housing: Constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
Lens/Door Assembly: Constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the tempered thermal and shock resistant Borosilicate glass sealed to the housing with high temperature, medium density, closed cell silicone gasket. Door frame attached and secured by stainless steel cam fasteners, which operate without the use of tools, for ease of relamping.
Reflector: Electropolished and anodized high purity aluminum, coilzak or equivalent. Spring loading of the reflector assures precise beam control with allowances for expansion/contraction cycles.
Electrical Power Tray: Constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Ballast secured to the removable power tray for ease of service.
Ballast Enclosure: Constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized. Ballast secured to a removable ballast tray for ease in service.
Ballast: Constant Wattage Autotransformer (CWA) Core & Coil ballast. Available in 120, 208, 240, 277 or 480 volt, and Multi-Tap (120/208/240/277), prewired to three feet of 16/3 STW-A cord. Cord is secured to enclosure with a watertight strain relief.
Mounting: Heavy gauge, die-formed hot rolled steel yoke.
Hardware: All external hardware is stainless steel, aluminum or hot dip galvanized.
Finish: Polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. Please consult the factory for availability.
UL Listed: Suitable for wet locations. UL1598

Housing: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
lens/door assembly: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the tempered thermal and shock resistant borosilicate glass, sealed to the housing with high temperature, medium density, closed cell silicone gasket. Door frame attached and secured by stainless steel cam fasteners, which operate without the use of tools, for ease of relamping.
reflector: electropolished and anodized high purity aluminum, coilzak or equivalent.
electrical power tray: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Ballast secured to the removable power tray for ease in service.
ballast: constant wattage autotransformer (cwa) core & coil ballast. Available in 120, 208, 240, 277 or 480 volt, and multi-tap (120/208/240/277). Fixtures with yoke mounting supplied prewired to three feet of 16/3 stw-a cord. Cord is secured to enclosure with a watertight strain relief. Fixtures with knuckle slipfitter mounting supplied prewired to power leads inside fitter's wiring compartment. Note: multi-tap ballast wired to 277v.
mounting: available with heavy gauge, die-formed hot rolled steel yoke or almag cast aluminum alloy slipfitter (sf), for standard 2 inch pole tenon mounting (2-3? 8" od) by others.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. Please consult the factory for availability.
ul listed: suitable for wet locations. Ul1598

Housing: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
lens/door assembly: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the tempered thermal and shock resistant borosilicate glass, sealed to the housing with high temperature, medium density, closed cell silicone gasket. Door frame attached and secured by stainless steel cam fasteners, which operate without the use of tools, for ease of relamping.
reflector: electropolished and anodized high purity aluminum, coilzak or equivalent.
electrical power tray: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content . Ballast secured to the removable power tray for ease in service.
ballast: constant wattage autotransformer (cwa) core & coil ballast. available in 120, 208, 240, 277 or 480 volt, and multi-tap (120/208/240/277). fixtures with yoke mounting supplied prewired to three feet of 16/3 stw-a cord. Cord is secured to enclosure with a watertight strain relief. Fixtures with knuckle slipfitter mounting supplied prewired to power leads inside fitter's wiring compartment.
mounting: available with heavy gauge, die-formed hot rolled steel yoke or almag cast aluminum alloy slipfitter (sf), for standard 2 inch pole tenon mounting (2-3/8" od) by others.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. standard colors include black, bronze and silver. Custom color matching is also available. Please consult the factory for availability.
ul listed: suitable for wet locations. Ul1598

Housing: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
lens/door assembly: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
lens/door assembly: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the tempered thermal and shock resistant borosilicate glass, sealed to the housing with high temperature, medium density, closed cell silicone gasket. Door frame attached and secured by stainless steel cam fasteners, which operate without the use of tools, for ease of relamping.
reflector: electropolished and anodized high purity aluminum, coilzak or equivalent. Standard internal louver provides precise arc-tube cut-off.
electrical power tray: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Ballast secured to the removable power tray for ease in service.
ballast: constant wattage autotransformer (cwa) core & coil ballast. Available in 120, 208, 240, 277 or 480 volt, and multi-tap (120/208/240/277). Fixtures with yoke mounting supplied prewired to three feet of 16/3 stw-a cord. Cord is secured to enclosure with a watertight strain relief. Fixtures with knuckle slipfitter mounting supplied prewired to power leads inside fitter's wiring compartment. Note: multi-tap ballast wired to 277v.
mounting: available with heavy gauge, die-formed hot rolled steel yoke or almag cast aluminum alloy slipfitter (sf), for standard 2 inch pole tenon mounting (2-3? 8" od) by others.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. Please consult the factory for availability.
ul listed: suitable for wet locations. Ul1598

Housing: one-piece aluminum die-cast housing.
lens/door assembly: one-piece die-cast doorframe secures the clear tempered thermal and shock resistant glass which is sealed to the frame with silicone and secured with stainless steel retainers. hinged door frame secured by three stainless steel captive screws.
reflector: electropolished and anodized high purity aluminum, coilzak or equivalent. Metal halide and hps units equipped with porcelain medium base 4 kv pulse-rated socket with stainless steel lamp shell and lamp grips.
ballast: integral mounted and prewired. Hpf core & coil ballast. Available in 120, 208, 240, 277 or 480 volt. Fixtures with yoke mounting supplied prewired to three feet of 16/3 stw-a cord. cord is secured to enclosure with a watertight strain relief. Fixtures with knuckle slipfitter mounting supplied prewired to power leads inside fitter's wiring compartment.
mounting: choice of heavy gauge, die-formed hot rolled steel yoke or knuckle slipfitter for standard 2 inch pole tenon mounting (23? 8" od) by others.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. Please consult the factory for availability.
ul listed: suitable for wet locations. Ul1598

Housing: two-piece spherical housing constructed of 8-gauge, lightweight aluminum.
lens/door assembly: constructed of heavy gauge aluminum with four stainless steel fasteners for positive locking weather tight seal and ease of relamping. Internal lens ring retainer with high temperature silicone gasket used to seal and secure tempered thermal shock-resistant optical glass lens. Door assembly is sealed to housing with high temperature closed cell silicone to ensure no gasket compression set. Supplied with stainless steel safety cable. Designer one-piece egg crate louver assembly standard.
reflector: electropolished and anodized high purity aluminum, coilzak or equivalent. The standard lamp holder is a porcelain medium base 4 kv pulse-rated socket with stainless steel lamp shell and lamp grips.
ballast: integral mounted and prewired. Hpf core & coil ballast. Available in 120, 208, 240, 277 or 480 volt. Fixtures with yoke mounting supplied prewired to three feet of 16/3 stw-a cord. cord is secured to enclosure with a watertight strain relief. Fixtures with knuckle slipfitter mounting supplied prewired to power leads inside fitter's wiring compartment.
mounting: choice of heavy gauge, die-formed hot rolled steel yoke or knuckle slipfitter for standard 2 inch pole tenon mounting (2-3/8" od) by others.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. please consult the factory for availability.
ul listed: suitable for wet locations. Ul1598

Housing: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.
lens/door assembly: constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the tempered thermal and shock resistant borosilicate glass, sealed to the housing with high temperature, medium density, closed cell silicone gasket. Door frame attached and secured by stainless steel cam fasteners, which operate without the use of tools, for ease of relamping.
reflector: electropolished and anodized high purity aluminum, coilzak or equivalent.
back-mount ballast enclosure (series 7000b): constructed of heavy gauge, die-formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized. Ballast secured to a removable ballast tray for ease in service.
remote ballast enclosure (series 7000r): see accessories sheet for details.
ballast: constant wattage autotransformer (cwa) core & coil ballast. Available in 120, 208, 240, 277 or 480 volt, and multi-tap (120/208/240/277), prewired to three feet of 16/3 stw-a cord. Cord is secured to enclosure with a watertight strain relief.
mounting: heavy gauge, die-formed hot rolled steel yoke.
hardware: all external hardware is stainless steel, aluminum or hot dip galvanized.
finish: polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating. Standard colors include black, bronze and silver. Custom color matching is also available. please consult the factory for availability.
ul listed: suitable for wet locations. Ul1598