Universal Process Calibrator
BTH, U.K. make Universal Process Calibrator-Model C9 is a very useful tool to calibrate many types of process control instruments which accept mV, mA and resistance inputs. This is designed to give highest stability and accuracy. The calibrator has a source & measure function & can be used for lab or field calibration of process control instruments, temperature & pressure transmitters, I/P convertors, field level transmitters, flow transmitters and a host of other instruments.
- Direct TC , mA & RTD output
- Source & Measure Function
- Back Light LCD
- Direct Calibration possible
- Automatic Power on/off function.
- DC current .001mA resolution.
- Power supply:6V batteries (4 no’s of 1.5 V)
Direct TC & RTD Output, DC Current .001 mA Resolution, Back Light L.C.D., Relative Range Selection 25% to 100% , Loop Power, Direct Calibration Possible, Automatic Power On/Off
|Power Supply||6 V Batteries (4 Nos. of 1.5 V) Alkaline AAA Batteries|
|OHM Resistance||0 to 400 Ohms|
|DC mV||10.00 to 100.00 mV|
|DC Voltage||-0.50 to 5.50 V|
|Frequency||1.0 Hz to 110.0 Hz, 0.100 KHz to 1.100 KHz, 1.0 KHz to 11.0 KHz|
|Analog Transducer XMT||0 to -22.00 mA|
|DC mA||0 to 22.00 mA|
|RTD||-200.0 Deg.C to 850.0 Deg.C, -50.0 Deg.C to 150.0 Deg.C|
|Thermocouples||-40 Deg.C to 1760 Deg.C (R,S,K,E,J,T,N,B)|
|Warranty||12 months manufacturer warranty|