The design of Commercial and Industrial plant rooms invariably requires the passage of large volume of air; air that is used forcooling, for consumption by Engines or Compressors and for Ventilation or Air Conditioning. Hence, for these generatingequipment air requirement, Designer or Engineer is facing with the problem of allowing the air to get in and at the same timepreventing the noise from getting out of the plant room.This criterion is often quite important, particularly when a low pressure drop is required and significant acoustic performanceis necessary to minimize noise annoyance. When one also considers that the architect will generally require an attractive,practical solution at low cost, then it is simple to understand why the Acoustic Louvres from AIPL are so popular. Owing to theirexcellent Noise Reduction capability, Acoustic Louvres can be used in almost any situation which must permit the flow of air,but control noise. The modular design and wide range of sizes and finishes allows them to be used in most industrial or
ð Fresh Air Intakes for Ventilation system.ð Mechanical Equipment Screens.ð Noise Attenuation solutions for Roof Top Plant TRooms.ð Acoustic Barriers.ð Process Air Intakes.ð Cooling Tower Inlet Attenuators and Screens.