Advanced Plastics Of Houston Incorporated

Our 1 1/4" angled shelf molding is a C type channeling also often call tag molding or label striping. Our 1 1/4" angled shelf molding will allow a 1 1/4" label to fit into the slot with slight bow. It upturns or downturns the channeling at a 45 degree angle. It can be used in conjunction with our 1 1/4" clear plastics chips which will allow you to affix your label to. Primarily, we run it with two pieces of 1/2" two sided foam tape. The foam tape will allow you to stick it to any clean and dry surface such as a metal shelf or wooden shelf. We always recommend cleaning your surface area with rubbing alcohol just to make sure that is clean before applying the foam tape. It comes in white, beige, gray, black, blue, light green, or your approved custom color. There is no standard length, we usually cut it to your desired length. Typically, it is packaged in 50 pcs as minimum boxed quantity.

Our 1 1/4" angled shelf molding is for retail applications. The added space for the label gives you a lot more room on the label for added information. It is used on bottom shelves. Typically, it can be placed on lower shelving which by design, it tilts the channel upwards so labeling can be easily seen and bar codes can be scanned more readily. Also, it is can be placed on a upper shelves which downturns the channel where it is more easily seen and bar codes can scanned more readily.