Air Process Systems L.L.C.

AirJetFabric Filters are designed to use pulsed compressed air for the cleaning of the filter bags which is the most effective method available. Multiple configurations are available which include bottom removal, side removal and top removal with either walk-in style or lift off doors. Our bags are constructed in a wide variety of weights and materials to accommodate the differing sizes of particulate and ranges of air temperature flowing through the collector. Ancillary equipment such as ash removal systems, I.D. fans, and motor control systems are available to provide a turnkey installation. Our collectors have been supplied to all types of industries throughout the world and have application wherever process air is exhausted. Standard Features: The dust collector is welded and factory assembled in the largest pieces practical to ship and minimize field erection. Units are designed for dust tight operation. A gas tight design is available as an option. Construction: Tubesheets are 10 gauge HRS. Plenum, housing, and hoppers are 12 gauge HRS. Units are stiffened for operation at 20"wg. Top lift off access doors are provided for bag maintenance. A "Walk In" housing mounted on top of the plenum provides weather protection for maintenance personnel. The hoppers are pyramidal in shape. Header: Header pipe assembly (consisting of header pipe, right angle diaphragm valves, solenoid valves and solenoid valve enclosure) is shipped mounted, tubed, and completely assembled. Diaphragm valves are " through 1", as required. A 0-160 PSI air pressure gauge is standard on all units. Solenoid valves are mounted in a die cast Nema 4 aluminum enclosure. Nema 7/9 enclosures are optional. Controls: Solid state timer with outputs matching the number of solenoids used to sequence the diaphragm valves. A Magnehelic gauge is provided to measure the pressure drop across the filter media. A filter is provided to prevent plugging the gauge. Timer and gauge are mounted in a Nema