The premium quality Activated Alumina offered by us is widely used in a large number of applications. These are based on latest technologies and made using fine quality material. Our customers highly value these for their ability to provide accurate and prompt results.
Some of the key application areas of the Activated Alumina offered by us are:
of air, gases and liquids
and conditioning of insulating oil and industrial oils
acidic impurities and trace metal scavenging in organic streams and
of oil vapors from gases
of drinking water
refrigeration circuits, transit packing for goods like electronic,
pharmaceutical and food
fire retardant fillers
catalyst for bed support / carriers
Other application areas:
is used for drying of high pressure air feed and gases up to Dew
Point of (-) 70 Deg.C. as well as for organic liquids to moisture
level of and below 10 ppm. The various gases and liquids that can be
dried using Activated Alumina are as follows:
Acetylene, Air, Ammonia, Argon, CO2, Cl2, Cracked Gas, Ehane,
Ethylene, Freon, Furnace Gas, He, H2, HCL, H2S, CH4, N2, O2,
Propane, Propylene, SO2 etc.
Benzene, Butadiene, Butane, Bromine Chloride, Butyl Acetate,
Carbon tetra chloride, Chlorobenzenes, Cyclohexane, Ethyl,
Hexane, Hydraulic Oils, HF alkylation feed, Jet Fuel, Kerosene,
Lubricating Oils, Naphthas, Nitrobenzene, Pipeline products,
Hylene, Refrigerants, Vegetables Oils, Transformer Oil etc.
catalysts and catalyst carriers: For reactions involving
Aromatization, Dehydration, Desulfurization, Hydrocarbon cracking,
Hydrocarbon Synthesis, Hydroforming, Oxidation, Hydrogenation and
Some of the features of Activated Alumina are:
porous form of aluminum oxide
of adsorbing and holding moisture without change in form of
inert to most of vapors and gases
and will not swell or disintegrate when immersed in water
resistant to shock and abrasion
of producing Dew Point up to (-) 80 Deg. C. under specific
dry gas: 120 Deg. C. - 150 Deg.C.
dry gas: 200 Deg. C. - 250 Deg.C.
up to maximum reactivation temperature of 315 Deg.C. without any
appreciable reduction of useful life
of being reactivated for almost unlimited number of times
Some of the key specifications of Activated Alumina are:
2-5, 3-6, 5-8 mm
Density: 0.75 to 0.85 Gms/Liter
Area: 345 to 415 M2/Gm
Volume: 0.40 to 0.50 CC/Gm
Capacity (at 60 % RH): 21.5 %.
Loss: 0.2 %.