# The cell is manufactured in aluminium alloy with HT steel bushes. # The cell incorporates an eight gauge bridge together with associated electronics and a 9 volt PP3 non-rechargeable battery. # Built into the load cell is a large [20mm] 3.5 digit liquid crystal display mounted on the front of the cell for easy reading from the operators position. # The load cell is self contained and has no external cabling. # A battery switch is provided on the rear of the cell to prolong battery life when the cell is out of use. # All set up and calibration data is retained when switched off. # The cell is automatically switched off after 15 minutes to prolong battery life. # Battery life typically 50 hours. Note :- The tare and peak readings are stored even after an automatic 15 minute shut down, the tare and peak reading being returned at next on press of the remote, [provided the cell rear button has not been switched off.] * Automatic range change is available when appropriate.