# The KMM Mains Monitor is designed to monitor the output from a strain gauge bridge loadcell. # Display resolution of up 4.5 digits # Maximum display of 19999 # Customised to output engineering units, including the sign of the load and the decimal point where appropriate. # 2 Part Control panel. Right hand side displays the digits, sign and decimal point. # The left hand side compromises of an aluminium panel with four push buttons located at the four corners - On/ Off Illuminating button - Tare Button - Peak Button - Reset Button # The last three buttons all have alternative uses during factory set-up and during load cell calibration. # A new instrument is first set up at the factory to the required full scale and decimal point position. # Automatic Range and Hold on Break feature is available. # Facility to line arise irregular outputs from Loadcells & Transducers.