Description:with color laser printers, color laser copier printers,make personalizing metallic t-shirts
spec:a3, a4, a5, a (letter), b (ledger)
product sizes : a(8. 5'x11') - 20 sheets, b(11'x17')- 20 sheets,
a4(210mm x 297mm)-20 sheets, a3(297mm x 420mm)- 20sheets,
this product is recommended with color laser printers, color laser copier printers for t-shirts, aprons, gift bags, wool garment, mouse pads, photographs on quilts etc. This transfer paper enables you to produce a metallic effect without using an additional metallic foil. When using tsl-300-metallic yellow turns to gold, grey turns to silver and all other colors appear in a metallic look.
◆customize fabric with favorite photos and color graphics
◆designed for vivid results on white or light-colored cotton or cotton/polyester blend fabrics
◆ideal for personalizing t-shirts, canvas bags, wool garment, aprons, gift bags, mouse pads, photographs on quilts etc.
◆ washable up to textile perfessional standard
◆iron on with a regular household iron & heat transfer press machines
3. Compatibility for color laser transfer paper
it can be printed with some of color laser printers, such as oki c5600n-5900n, c8600-8800c,epson laser c 8500, c 8600, hp 2500 l, 2600, minolta cf 900 9300/9500, xerox 5750 6250 dc 12 dc 2240 dc1256ga, canonclc500, clc700,clc800, clc1000, irc 2880 etc.
4. Printer recommendations
printer settings: photo print quality.
laser printers: it is designed to work with most laser printers.
a. Prepare a stable, heat-resistant surface suitable for ironing on.
b. Preheat the household iron to the cotton setting.
c. Briefly iron the fabric to ensure that it is completely smooth,
d. Peel off the top layer of transfer paper onto fabric with the printed image facing upwards.
e. Place the grease proof release paper onto it.
f. Do not use the steam function. Make sure that the heat is evenly transferred over the entire area. Iron the transfer paper, applying normal pressure. When moving the iron, less pressure should be given. Don't forget the corners and edges.
g. Continue ironing until you have completely traced the sides of the image. This entire process should take about 60-70 seconds for an 8"x 10" image surface. Follow-up by ironing the whole image quickly, heating all of the transfer paper again for approximately 10-13 seconds.
h. Peel the release paper starting at the corner after the ironing process.
6. Heat press machine transfer processing.
a. Set heat press machine at 165°c, for 25 second using moderate pressure.
b. Briefly heat the fabric for 5 second to ensure that it is completely smooth.
c. Before transferring, cut out the motif without leaving a margin around the edges.
d. Peel off the top layer of transfer paper from the paper back with adhesive polyester film.
e. Place top layer of transfer paper onto fabric with the printed image facing upwards.
f. Place the cotton fabric onto it.
g. Heat press machine at 165°c, for 25 second.
h. Peel the adhesive polyester film starting at the corner.
6. Washing instructions
wash inside out in cold water, do not use bleach,
7. Material storage
conditions of 35-65% relative humidity and at a temperature of 10-30°c.