Allweiler-Farid Pumps

Deep Well Turbine Pump Produced in different types suitable for 6 to 14 inch deep well Fabricated from High Standard materials. Main Fields of Applications: Agricultural Irrigation.
Domestic and General Water Supply.
Fire Fighting Emergency Water Supply.
Fountain Water Supply.
Dewatering.
Pressure Booster Applications.
Industrial Applications.
Mining. Construction Design and Performance: Discharge: up to 700 m³/hr.
Head: up to 700 m.
Temperature: up to 5

Main Fields of Applications: Drainage, Flood Control and Irrigation Service Storm Water Disposal.
Moderate Head or Primary Pumping.
Dewatering of Excavations, Coffer Dams Or Dry Docks.
Designed especially for Large Capacity Moderate Head Pumping Service, These Modern Pumps are Ideal for use.
Wherever a reasonably Portable.
Self-Contained Pumping Unit is needed. Performance Data: Discharge: Up to 11600 m³/hr
Head: up to 200 meter. Materials: Main Parts: GG 25
Impeller: GG 20 or Bronze
Shaft: ST.ST.
Shaft Sealing: Stuffing Box or Mechan

Main Fields of Applications: Draining of Sanitary Sewage Water.
Draining of Industrial Waste Water.
Draining of Muddy Water.
Pumping of Petroleum liquids.
Feeding or Drainage of Fish Farms.
Agricultural Drainage.
Fire Fighting. Performance Data: Discharge: up to 460 m³/h.
Manometric Head: up to 89 m.
Temperature: 120^oC maximum. Materials: Main Part: C.I.GG 25.
Impeller: C.I.GG 20 or Bronze.
Shaft: Stainless Steel.
Sealing: Stuffing Box with Gland or Mechanical Seal.
Bearing: (2) Self Lubricated High Speed Ball
Bearing ZZC3

Main Fields of Applications: Feeding of Steam Boilers.
Cooling Cycles.
General Purposes that need High Pressure. Performance Data: Discharge: up to 500 m³ /hr
Head: 60 -1798 m.
Temperature: up to120^oC. Materials: Suction Casing: GG – 25.
Discharge Casing: GG – 25.
Stage Casing : GG – 25.
Diffuser: GG – 25 or Bronze.
Shaft: Steel or St.St.
Impeller: GG – 25 or Bronze.
Design Equipped with Shaft Sleeves.
Grease Lubricated Bearing.

Main Fields of Applications: Feeding the Steam Boilers & Cooling Cycles.
Ensure a Constant Pressure in Fire Fighting Pipe Lines.
Pumping Liquids, Containing Gases. Performance Data: Discharge: 35 m³/hr.
Head: 20 bar.
Temperature: 120^oC maximum. Materials: Main parts: made of C.I – GG 25.
Impeller: Bronze.
Shaft: Stainless Steel.
Sealing: Stuffing Box with Gland or Mechanical Seal.
Bearing: Two Self Lubricated High Speed Ball Bearing ZZ C3.

Main Fields of Applications: Specially Designed for Surface Irrigation From Channels, Rivers and Surface Wells.
The medium could be Clear Water or Raw Water. Application Data: Discharge: up to 250 m³ /hr
Head: up to 10 m.
Temperature: 120^oC maximum. Material: Main Parts: GG 25.
Impeller: GG 20.
Shaft: ST.ST.
Size: Suction and Discharge Flanges DN 6/6 inch, 5/5 inch, 4/4 inch.
Sealing: Stuffing Box with Gland.
Bearing: Heavy duty Pedestal with tow Ball
Bearings ZZC3.
Prime Mover: the Pumps connected with Diesel Engine on movable or fixed Base Plate Or connected With Electric Motor on a Fixed Base Plate by Flexible Coupling.
The Pump can be Equipped with a Manual Priming Pump.

Centrifugal End Suction pump with vacuum assisted priming.
Two/Four Wheels site trailer with built in fuel tank, 24 hours running with cleaning and flushing facilities. Main Fields of Applications: Well point dewatering.
Pumping waste water.
Pumping oily water.
Sewage and Sludge. Performance Data: Discharge : up to 360 m³/hr.
Head : Up to 40 meter.
Max. Solids : Up to 50 mm. Materials: Main Parts : Cast Iron.
Impeller : Cast Iron.
Shaft : Stainless Steel.
Sealing : Soft Packing or Mechanical Seal

Centrifugal Horizontal Single Stage Mixed Flow Pumps. Main Fields of Applications: Pumps Station for Irrigation & Drainage With Low & Medium Pressure.
Feeding Ends of Canals from Drainage Canals.
General Industrial Application. Performance Data: Discharge: up to 3600 m³ /hr.
Head: up to 30 m. Materials: Main Parts: GG 25.
Impeller: GG 20 or Bronze.
Shaft: ST.ST.
Shaft Sealing: Mechanical Seal.

Horizontal Signal Stage Volute Casing, Self Priming Centrifugal Pumps Main Fields of Applications: Self Priming pump for Fire Fighting Units which uses Underground Water Tanks or Similar cases.
Used in clear water and light petroleum liquids as well as the liquids not containing abrasive materials.
Only Pure Water to be Handled. Performance Data: Discharge: up to 500 m³ /hr.
Head: up to 90 m.
Temperature: 120^oC maximum
Sealing: Mechanical Seal.
Bearing: Two Oil Lubricated High Speed Ball Bearing. Material: Main Parts: C.I. GG 25.
Impeller: C.I. GG 20 or Bronze.
Self Priming Parts: Bronze.
Shaft: Stainless Steel.
Sealing: Mechanical Seal

Single Stage Double Suction Split Casing Centrifugal Pumps. Main Fields of Applications: Waterworks Irrigation & Drainage Pumping station.
Power Station.
Industrial Water Supply.
Fire Fighting. Performance Data: Discharge: Up to 11600 m³/hr
Head: up to 200 meter. Materials: Main Parts: GG 25
Impeller: GG 20 or Bronze
Shaft: ST.ST.
Shaft Sealing: Stuffing Box or Mechanical Seal.

Stainless Steel Vertical Multi Stage Pump Main Fields of Applications: Water supply and boost for residence
Water supply for industrial boilers
Water supply for the circulation of an air conditioning system
Water treatment and anti-penetrating system
Water supply for food and pharmacy industrial Performance Data: Discharge: 0.8 up to 192 m³/h
Head: 4.2 up to 259 m
Temperature: -20 up to 120^oC Materials: Motor base : GG 20
Pump cover : GG 20
Shaft : 304
Impeller : 304
Guide vane : 304
Outer sleeve : 304
Pump casing : GG 20
Base : GG 20

Volute Casing Centrifugal Pumps Made of Special Alloys for Chemical & Petroleum Liqui Main Fields of Applications: For Chemical and Petroleum Liquids.
Used also for Food & Pharmaceutical Industries. Performance Data: Discharge: up to 900 m³/hr.
Head: up to 100 m.
Temperature: 125^oC maximum.
Volute Casing Centrifugal Pumps Made of Special Alloys for Chemical & Petroleum liquids. Materials: Sealing: Stuffing Box with Gland or Mechanical Seal.
Bearing: (2) Self lubricated High Speed Ball.
Bearings ZZC3 Materials.
All Parts which contact with Liquid are Made of Special Alloys.

Volute Casing Centrifugal Pumps in Block Design. Main Fields of Applications: Pumping Pure Water to Housing Utilities. Water. Performance Data: Discharge: up to 14 m³/hr.
Head: up to 35 m. Design: Specially Designed in 3 models 1.5 hp & 2 hp Single Phase Motor 3 hp in 3 Phases Motor.

Volute Casing, Horizontal, Single Stage Centrifugal Pumps According to DIN 24255. Main Fields of Applications: Pure Water for Drinking, Industries, Swimming Pools.
Cooling and Air-Conditioning Cycles.
Raw Water for irrigation Systems.
Low Viscosity Petroleum Liquids.
Fire Fighting. Performance Data: Discharge: up to 1200 m³/hr.
Head: up to 140 m.
Temperature: 160^oC maximum. Material: Main Parts: C.I.GG 25.
Impeller: C.I.GG 20 or Bronze.
Shaft: Stainless Steel.
Pumps: can be provided with special Alloys according to pumped fluids.
Sealing: stuffing box with gland or mechanical seal.
Bearing: tow self lubricated high Speed ball bearings ZZC3.

Volute casing centrifugal pumps of Block design. Main Fields of Applications: Cooling and heating systems.
In Circulating, water supply, water treatment, irrigation, sea water desalination, dedusting and spray painting plants as well as in air-conditioning, cooling, swimming pool and industrial engineering.
For pumping pure water, industrial water, sea water, condensate, oil, brines lyes and hot water. Performance Data: Discharge : up to 380 m³ /hr
Head : up to 130 m
Temperature : up to 140^oC Materials: Main parts : GG – 25
Impeller : GG – 25
Shaft : ST.ST.