
DESCRIPTION:
Washing Soda is a crystalline chemical cleaning / stripping agent.
USAGE:
Washing Soda is normally used in solution to remove varnishes / other finishes from wood.
Used on floor tiles, cement floors, dirty overalls etc
Washing Soda is also used to neutralize Caustic Soda.
METHOD OF APPLICATION:
Add 250g of Washing Soda to 5lt of warm water and stir until it dissolves.
Apply to the surface of the wood with brush or cloth.
If required, increase concentration by adding a further 250g.
SAFETY PRECAUTIONS:
Do not expose the product to an open flame. Do not inhale fumes. Use solvent resistant gloves. Do not smoke when using product.
Keep out of reach of children.
MEDICAL ADVICE:
If swallowed seek medical attention immediately.
Contact with skin - wash off with soap and water.
Contact with the eyes - wash off with water and seek immediate medical attention.
Abstract Single screw pump is widely used in chemical industry to convey many types of fluids in a continuous, low pulsating manner, while ...
Love Belle Terre soap? Why not use it for your clothes as well? Belle Terre laundry detergent takes all the loveliness that is in our soap and adds ...
Our 2.64 lbs. bag of laundry powder can do up to 80 full wash loads. Thats just pennies per load! Needs only 1 TABLESPOON per large washload - That's ...
One traits: Before curing,is non-toxicbutslightlystimulation of viscous liquid. Two, the use of methods In 1, the main agent and hardening agent ...sending
enquiry
|