MODEL AFAE1000 SERIES
The basic filling head comprises five primary components:
- S.S Hopper containing the powder to be dosed
- Augur or screw rotating vertically through the hopper.
- Funnel or tube outlet to hopper through which the lower parallel part of the auger doses.
- Auger(Screw) drive.
- Agitation blade(Stirrer) to assist powder feed properly into the flights of the augur.
STRUCTURE AND WORKING:
Augur filler is made strong and vibration free by its specially designed Pillar structure. This is made from Mild steel ROUND Pipe section of good thickness Hard chrome Plated, which holds drive unit, hopper and related parts. A drive motor and an electromagnetic clutch brake assembly are driving the Augur. A safety cover is provided to this assembly to protect from accidents and to avoid dust from drive. Main driven shaft connected to the drive shaft through a Bearing housing holds and rotates freely when the machine is operated. A stirrer blade provided separately which is operated independently over the driven shaft. The driven shaft is holding an accurately machined stainless steel AUGUR which performs the filling inside the Nozzle. The lower parallel flights of the auger within the funnel are machined to a constant pitch so that, when filled, each pitch has a precise volume. The auger drive rotates the auger at constant speed to produce a continuous dosing flow. The agitation blade, generally separately driven and controlled, rotates in the opposite direction to the auger breaking any bridge that tends to form in non-free flowing powders. The agitation blade extends right down to the throat of the funnel preventing rat-holing and cavitation and ensuring that the flights are fully filled. The start/stop signals to the auger drive, control the pre-set weight in Weigh metric fillers.
TECHNICAL SPECIFICATIONS AFAE1000:
Machine size: 1050 L X 700W X 1950mm height.
Drive Motor :1 HP 230VAC-415VAC 50Hz, 1440 rpm. with VFD(Variable Frequency Drive)
Power : 230VAC 50Hz Single Phase
Stirrer motor: 1/2 Hp 32rpm 230VAC Worm Geared
Electromagnetic Clutch- Brake: HSCBC 100, 24 VAC Cryotron Make
All material contact parts in S.S. 304
Stainless steel 304 Augur ( Screw) type filling.
Hopper size 50 Litres (S.S 304), 18 Gauge, mirror finish for AFAE1000
Fill capacity: 50-1000 gms at a time as per set time,
- Augur Based filling equipped with digital Timer.
- One touch Start by a foot-switch
- Drive through electro-magnetic clutch brake system to get high accuracy filling.
- High output and increased efficiency.
- Slow speed geared motor attached to stirrer helps to feed augur uniformly
- Output of 15 fills/minute can be achieved.
- High Accuracy up-to +/- 1% of fill volume.
- Low maintenance needed in this model .