PSCT15 is compact and sturdy machine for sealing, Batch coding and trimming Plastic or Laminated filled tubes in medium output. A high efficient and simple to operate design from AMSON Engineering, by which you can seal, stamp Batch Code and trim around up to 4000 sealed tubes in 8 hour shift. PSCT15 is suitable for Cosmetic and Pharma industries where the daily production is medium. This model can be also used for lab and R&D purpose because each time a single tube is sealed or trimmed. The Machine occupies a small area of floor space (2 ft X 2 ft). Peculiarity of this design is all operations are done pneumatically. There are switches for Auto and Manual selection. Each operation can be individually selected by electrical Push buttons. Inbuilt Panel box at the front side, having Main operating switches and controls like Mains ON-OFF, Emergency Stop, Digital Temperature control are given. Timers for Heating, Sealing, Trimming are mounted at the front operating panel. A set of solenoid valves responsible for the synchronized operation of the machine is safely fitted at separate chamber on the back bottom side of the Machine.
Any tube diameter from 16 mm to 50 mm can be sealed and trimmed in this model.
Tube diameter changes but holder outside diameter same. This helps in holding any sized tubes in location without changing centre.
Easy adjustment of sealing station height according to different tube heights by rotation hand wheels.
Any tube heights from 60 mm to 250mm can be sealed and trimmed.
1 pair of different tube holders supplied with the machine.
All types of tubes can be sealed whether it is plastic or Laminated/ LD/Monolayer/Multi Layer etc which have plastic inner lining.
Adjustable digital temperature controller to select different temperatures for different materials of tubes.
In-House Manufactured Stainless steel Hot Air Gun with high efficiency.
Adjustable heating time and sealing time for different tubes.
Solenoid operated trimming and sealing station and can be operated by push button in manual mode.
Separate air pressure regulator for the machine to maintain air pressure steady.
Flow control valve to maintain hot air flow to the tube ends.
Compact model in its class requires small area to occupy
Overall size: 500mmL X 500mmW X 1200mm H
Packing size: 2Ft Length X 2 Ft Width X 4 Ft Height.
Total machine Weight: Approx: 75Kgs.
Gross weight including packing: 120 Kgs.
Power supply required: 220VAC,50HZ,2KW
Heater power: 2.5 Kilo Watts
Air pressure required: 5.5 Kg/cm2 ( 4 cfm- 2 HP Air Compressor)
Complete Stainless Steel Hot air assembly.
Sealing type: Hot air assisted Pneumatically operated sealing jaws.
Output: 10 tubes/minute.
Tube sizes: Diameter16 mm to 50 mm
Tube length: 60mm to 250mm.
Tube placing: Manual.
Machine model: PSCT15
Number of Batch codes inserted: 10 Nos.
Both Side Batch coding possible on request.
Batch code size: 2mm W X 4mm H X 12.55mm Length
Sealing width: 5mm
Machine type: Semi-automatic tube sealing, coding, and trimming machine, Standard MODEL with all Contact Parts in SS304 Quality Machined, fabricated and finished to Mat, and all other non-contact parts are made in carbon steel finished and chrome plated quality..
Air Pressure required: 5.5 kg/cm2 @ 4 cfm(2Hp Twin Cylinder Single/Three Phase)
All moving parts, machine frame covered by SS sheet metal of good gauge and finish.
Panel box inbuilt carrying timers, Temperature controllers and operating switches.