PSCT15 is compact and sturdy machine for sealing, Batch coding and trimming Plastic or Laminated filled tubes in medium output. A high efficient and simple to operate design from AMSON Engineering, by which you can seal, stamp Batch Code and trim around up to 4000 sealed tubes in 8 hour shift. PSCT15 is suitable for Cosmetic and Pharma industries where the daily production is medium. This model can be also used for lab and R&D purpose because each time a single tube is sealed or trimmed. The Machine occupies a small area of floor space (2 ft X 2 ft). Peculiarity of this design is all operations are done pneumatically. There are switches for Auto and Manual selection. Each operation can be individually selected by electrical Push buttons. Inbuilt Panel box at the front side, having Main operating switches and controls like Mains ON-OFF, Emergency Stop, Digital Temperature control are given. Timers for Heating, Sealing, Trimming are mounted at the front operating panel. A set of solenoid valves responsible for the synchronized operation of the machine is safely fitted at separate chamber on the back bottom side of the Machine.
PSCT15 is compact and strong with accurately machined metal plates and standard parts. Manufacturing and assembly is done under the observation of qualified designers and engineers to get maximum quality. Pneumatically operated model which reduces mechanical parts and there is less maintenance required. High quality parts keeping International standards.
Base frame of this machine is manufactured from stainless steel square Pipe section and sheet metal, which is fabricated, welded and finished to mat. A main vertical slide unit supports total assembly, like Sealing and Trimming units. Easy rotating hand wheel helps in height adjustment for different tube heights. A cross plate is mounted carrying sealing and trimming stations at left and right sides respectively.
Sealing plate is working on Linear Motion Bearings over Hardened and Ground Shafts fixed both ends by strong plates. Pneumatic cylinders are mounted and connected with the sealing plates at both sides. Sealing plates carries the textured sealing teeth where batch numbers can be inserted. Sealing width of maximum 5mm is provided with vertical line texture for sealing design. Both side batch numbers for coding is also possible on request.
Overall size: 500mmL X 500mmW X 1200mm H
Packing size: 2Ft Length X 2 Ft Width X 4 Ft Height.
Total machine Weight: Approx: 75Kgs.
Gross weight including packing: 120 Kgs.
Power supply required: 220VAC,50HZ,2KW
Heater power: 2.5 Kilo Watts
Air pressure required: 5.5 Kg/cm2 ( 4 cfm- 2 HP Air Compressor)
Complete Stainless Steel Hot air assembly.
Sealing type: Hot air assisted Pneumatically operated sealing jaws.
Output: 10 tubes/minute.
Tube sizes: Diameter16 mm to 50 mm
Tube length: 60mm to 250mm.
Tube placing: Manual.
Machine model: PSCT15
Number of Batch codes inserted: 10 Nos.
Both Side Batch coding possible on request.
Batch code size: 2mm W X 4mm H X 12.55mm Length
Sealing width: 5mm
Machine type: Semi-automatic tube sealing, coding, and trimming machine, Standard MODEL with all Contact Parts in SS304 Quality Machined, fabricated and finished to Mat, and all other non-contact parts are made in carbon steel finished and chrome plated quality..
Air Pressure required: 5.5 kg/cm2 @ 4 cfm(2Hp Twin Cylinder Single/Three Phase)
All moving parts, machine frame covered by SS sheet metal of good gauge and finish.
Panel box inbuilt carrying timers, Temperature controllers and operating switches.