This semi automatic volumetric liquid filling machine, Model No: AEVMF02100 can be single or two head, table top, complete GMP / semi-GMP model used to fill variety of liquids. Semi automatic volumetric liquid filling machine can be used for filling different types of glass. Plastic. Metal containers. Any free flowing or partially free flowing liquids with comparatively low viscosity with volume filling requirement can easily and accurately filled with this machine. Output of this machine is very high as compared to Manual Hand operated machines.
The main specialty of this machine is there is no human power is required to fill the bottle. The only job is to start the machine, and to place the empty bottles below the filling nozzle. All the other jobs like suction volume measuring and filling are done by this machine itself. Twin head machines in this series can fill two equal or different volumes at a time. If two peoples are doing the filling, then the output can be higher upto 30 to 40 fills per minute as per syringe size.
Machine Structure and Working:
The AEVMF02100 works on volumetric principle and is fitted with single/two syringes on both the sides. The motor and gear box are covered in a Stainless steel cabinet. The desired volume can be adjusted by increasing or decreasing the eccentricity of the cam provided with the machine. Bottles are kept bellow the nozzles manually.
There is Stainless steel Syringes and Piston at both sides which do the filling. A non-return valve helps the control of flow towards and from the syringe during working. A Polished SS Nozzle is provided for both the syringes connected by pipes and mounted on height adjustable supports.
The human labor is required to operate this machine is only one. The main switch is to be started to start the filling. Each filling is done at a particular intervals. The bottles to be filled is to be placed under the fill nozzle after each filling after removing the filled bottles.
Output 16/24 bottles per minute from each head depending on type liquid and fill volume. All the contact parts are made of SS 304/316 as per material to be filled/ as per specification.
- Machine is made compact with sturdy internal frame structure.
- Complete machine frame is covered with stainless steel 304 quality sheet metal of good gauge and finished to mirror.
- All working parts like, motor, gear box, and shafts are inside the cover to avoid any danger.
- Adjustable fill volume by an eccentric cam screw rotation.
- Flame proof motor and switches provided for inflammable material filling on request.
- Very useful for pesticides, oils, syrups, lotions etc.
Specifications for Double Head Liquid Filter:
size : 400mm L X 400mm W X 500mm H
capacity : 10ml-100ml max(SS Syringe) at one side
capacity : 10ml- 100ml max(SS Syringe) at other side
fill volume by cam and screw.
capacity : 1/2HP 1440Rpm, 220VAC, 50Hz,
Box : 60 : 1 ratio.
nozzles and output pipe provided,
Hot Liquids, Silicon Pipes provided.
separate Hopper provided, Input of (Suction) liquid can be done from
Jacketed Vessel of any capacity can be available as per order as
Single person can operate the machine.
part Syringe (Compatible)available on order at extra cost, for
different volume filling.