Double Ball Valve Fitting, Deck Mounted
Application: On/off control of all laboratory gases. For use at pressures up to 75 PSI. When ordered, valves and fittings may be specially cleaned, lubricated and packaged for pure gas service. Valve is certified for gas service by CSA International. Valve is recommended for ADA-compliant applications.
Finish: Fixtures are available with a choice of six powder coated finishes. Specify finish when ordering: white, gray, tan, polished chrome with clear epoxy, satin nickel with clear epoxy or satin chrome with clear epoxy.
Mounting: Deck mounted turret base with two valves at 180 degrees.
Valve Units: Quarter turn open/close with chrome plated brass balls and molded TFE seals.
Inlet: 3/8"/1/2" IPS male inlet.
Outlets: 3/8" IPS female outlets with removable seven serration hose ends.
Quality Assurance: Fitting is fully assembled and factory tested prior to shipment.
LTFS4200-232SALPL Same as above except with FlowStop.
LT4200-232AALPL Same as above except with two ball valves at 90 degrees.
LT4200-234ALPL Same as above except with four ball valves.