Panel Mounted Valve, Straight Face Hood
Application: Flow control of laboratory gases, water, steam and pure water in fume hoods and fume cupboards. Valves are installed on the front exterior face of the hood or cupboard. By eliminating an extension rod between the valve and handle, the user has more precise control of the valve. Maintenance of the valve is greatly simplified, since all of the working components of the valve are accessible from the front exterior face of the hood or cupboard.
Finish: Fixtures are available with a choice of six powder coated finishes. Specify finish when ordering: white, gray, tan, polished chrome with clear epoxy, satin nickel with clear epoxy or satin chrome with clear epoxy.
Panel mounted valve for installation on straight face of hood. Valve is installed from behind panel and is secured with external locking ring on front of hood. Valve inlet and outlet are 3/8" IPS female threads.
To order valve, select model number desired from below:
LT740W Compression valve construction for water service.
LT740FCN Fine control needle valve construction. Valve is specially cleaned, lubricated and packaged for use with high purity gases.
LT740N Needle valve construction for laboratory gases, including vacuum.
LT740G Push/turn construction for natural, bottled and other combustible gases.
LT740GI Same as above except with pop-up indicator buttons.
LT740S Steam valve construction.
LT740WTL Tin-lined brass construction for distilled, deionized and reverse osmosis water.