Aqueous Polymer Elastocryl is an excellent product for waterproofing.
Aqueous polymer Elastocryl is generally compatible with various types of thickeners (mineral thickening agents, cellulose ethers, associative thickeners, polyurethane etc.) and the selection is dependent upon flow properties of the final product, its application method etc. Manufacturers must carry out their own trials for developing products based on Aqueous polymer Elastocryl, in manufacture and use, the compatibility of their components and final performance is affected by a large number of factors, which we cannot cover exhaustively in our own trials.
|Solids content||50 ± 1 %|
|Viscosity at 30°C in Brookefield|
Viscometer spindle 4/20 rpm
|: 1600 – 4600 cps|
|pH||: 7.5 – 9.0|
|Density at 20°C||ca. 1.04 g/cm³|
|Average particle size||ca. 0.1µm|
|Minimum film forming temperature||18° C|
|Plasticizer content||Free from plasticizer|
|Miscibilty with water||Good|
|Pigment binding capacity||Very High|