Batch Foaming Machine are used to produce flexible PU foam blocks with one block at a time process. These are low priced machines meant for relatively low production.Capacity upto 30 to 40 blocks per 8 hour Density 10 to 32.
|GENERAL SPECIFICATION||MODEL BFM B|
|Mixer motor||10 H.P. with AC drive for speed control.|
|Mixing tank||210 Liters|
|MIXING CAPACITY||125 KG|
|Material discharge||From bottom by manually operated lifting mechanism.|
|Control Panel||One mould of 6ft. x 6ft. having aluminium sheets on sides & wooden board on the base.|
|Space required||4m x 8m|
|Power required||10 HP|
|Power required||415V AC 50Hz|
- First, all chemicals are weighed & kept ready for the process.Polyol and catalysts are poured into the mixing vessel and first mixing is started by pressing the speed 1 push button.
- Now TDI & Water are poured in quick succession & Speed 2 is switched ON. The machine mixes the chemicals & releases them into the mold. The open door in the mold is closed manually. The block may be demolded after 5 to 10 minutes.