Standard Batch Foam Machine are used to produce flexible PU foam blocks with one block at a time process. These are low priced machines meant for relatively low production.
- Block by block process.
- Density 10 to 32
- Automatic timed mixing and pouring
- Capacity upto 40 blocks per 8 hours
|Motor||10 H.P. Controlled by A.C. Drive|
|Mixing Capacity||125 KG|
|Material discharge||From bottom controlled by pneumatic cylinder.|
|Weighing Scale||Electronic scale: 6 and 300 k.g.|
|Control panel||Has all the push buttons, two preset speeds with timers and variable frequency drive for the mixer motor.|
|Mould||One mould of 6ft. x 6ft.|
|Compressor||2 HP Compressor Provided|
|Space required||4m x 8m|
|Power required||9 KW|
|Power supply||415V AC 50Hz|
- First, pre weighed water and TDI are poured into their respective pouring tanks, placed just above the main mixing vessel.Polyol and catalysts are weighed manually and poured into the mixing vessel and first mixing is started by pressing the speed 1 push button.
- Now the TDI + Water valves are opened(from the control panel). Once TDI+Water are poured into the mixing vessel, Speed 2 is switced ON. The machine mixes the chemicals & releases them into the mold. The open window in the mold is closed manually. The block may be demolded after 5 to 10 minute.