The primary soil tillage machine is mounted and trailed from tractor's hydraulic lifting unit and universal three point linkage system. Therefore transportation to the field can be easily done.
The purposes of tillage are as follows; cultivating of stubbly and fallowing soil, mulching the soil, preparing the seed bed, controlling the weeds and diseases, putting the fertilizer, herbicide and stubble in the soil, decreasing the wind and water erosion, increasing infiltration and leaving the rainwater on the field.
The ploughs is prevented from being damaged by any material such as visible or invisible rock, stones, tree roots under the soil by means of a special spring protection mechanism which are placed into the every moldboard. This mechanism helps the moldboards to get rid of any obstructions easily. Spring protection mechanism’s tension hardness can be adjusted upon the soil conditions.
Ploughs are manufactured as 3, 4, and 5 moldboard, 120x100 mm, 140x120 mm and 160x120 diameter profile chassis. Distances between moldboards are 65 cm, 75 cm, 80 cm and 85 cm and hydraulically adjustable.
Ploughs shall work together with 12 and 14 inch tractor power. Its moldboards are compatible with different field conditions. If desired, moldboard quantities shall be increased by adding additional bodies. By means of safety system of our ploughs, being damaged rate is reduced at the lowest level.