Manufactured by BrewVint™.
Counterflow wort chillers work by allowing wort and cool water to flow in opposite directions, so wort is being chilled by increasingly colder water. The cooling water connections on this model are made of heavy-duty brass fittings. The beer never comes in contact with brass or the hose, only the 3/8" OD copper coil on the inside. We recommend using this counterflow chiller with kettles with spigots to drain the wort. This deluxe model is 25' (7.6 m) in length for increased efficiency over shorter models.
During the warmer months of the year, or to increase the efficiency of your immersion chiller, a pre-chiller is recommended. A pre-chiller is a 15’ (4.6 m) copper coil that is submersed in an ice water bath while connected to the wort chiller. Our pre-chillers come with garden hose fittings for an easy connection to the counterflow chiller. The water first flows through the ice cold pre-chiller before it goes through the wort chiller itself.