Product composition: BP Cement Primer (WT) is prepared with 100% Acrylic binder and micro fine pigments along with extenders and different additives. It is an air drying low smell primer for masonry providing hard tough film.
USP: Good for masonry and asbestos surfaces. It is free from any heavy metals like lead, mercury and chromium. It is a high whiteness primer with high chalk resistance, opacity and easy brush ability.
Safety features: Non-flammable as it is water based.
DIRECTIONS FOR USE Surface preparation: Ensure the surface is rubbed properly with Sand Paper No.60/80/100/120 in phases and ensure all dust is removed. Wipe clean with water and make sure the surface is fully dry.
Application: Apply 1 coat of BP Cement Primer (WT) after diluting properly and straining through a clean cloth. It can be applied by brush or spray. Brushing viscosity should be 40-50 sec at 30°C in Ford Cup B4 and in case of spray application it should be 25-30 sec at 30°C in Ford Cup B4.