Product composition and usage: BP White Primer (WT) is manufactured with a special type of acrylic binder and micro fine pigments along with extenders and different additives. It is an air drying primer for masonry providing a hard. tough film.
USP: Good for masonry and asbestos surfaces. It is free from any heavy metals like lead, mercury and chromium.
Safety features: Non-flammable as it is water based.
DIRECTIONS FOR USE : Apply 1 coat of BP White Primer ( WT ) after diluting properly and straining through a clean cloth. It can be applied by brush or spray. Brushing viscosity should be 50-60 sec at 30°C in Ford Cup B4 and in case of spray application it should be 25-35 sec at 30°C in Ford Cup B4.
Surrace preparation ana painting procedure: Ensure the surface is rubbed properly with Sand Paper No.60/80/100/120 in phases and ensure all dust is removed. Wipe clean with water and make sure the surface is fully dry.
Consistency: It is a free flowing high viscous liquid.