Luxol Satin enamel gives excellent sheen finish for interior walls in solvent-based range. It builds a tough film with outstanding washable properties. It is a long-lasting solvent-based paint for special areas like bath rooms, kitchen, balcony and hotels' common areas. It is based on specially formulated alkyd resin with micro-fine pigments and extenders. It has been designed in such a way that it gives a silken smooth and glowing finish.
- Long Lasting
- Soft sheen finish
Safety Features: Flammable
DIRECTIONS FOR USE: Surface preparation: Initially sand the surface with coarse sand/water paper according to the type of surfaces to remove rust, dust and other loose, unwanted particles. Wipe the surface clean. Apply 1 coat primer after proper thinning and allow the paint to dry fully. Sand the surface again with less coarser sand/water paper lightly and wipe clean. Apply 2 coats appropriate primer giving overnight interval between the coats. Sand it again with Water Paper No.220/280. For wooden and metal surface apply 1 coat of Luxol Speed Coat Primer Surfacer with proper dilution, and for wall surface apply 1 coat of solvent-base cement primer with ideal dilution. Allow it to dry fully. Sand the painted surface with Water Paper No.380/400 lightly to make the surface smooth and undulation free. Before application of top coat, dilute the paint as mentioned above and strain it through clean cloth. Ensure that the paint brush and mixing container are absolutely clean. Apply Luxol Satin 2 to 3 coats to get rich, smooth and soft silky finish, giving overnight drying intervals between the coats. Before applying top coat, sand the surface lightly with Water Paper No.400/600. Ensure surface pH value is within 7- 11. Luxol Satin Enamel should not be used on damp surfaces or substrates, subjected to continuous seepage.