WeatherCoat Hi-Build is an European concept. Uniqueness in its textures has made it achieve exceptional results. The texture coating provides a decorative and protective plaster coat for the interiors and exteriors of the building. Imparts a stunning decorative effect to get a single or multi-coloured combinations. In India, this decorative segment is climbing the ladder of success.
The product consists of 2 components
A. Specially formulated medium
B. Natural aggregates of different colours
DIRECTIONS FOR USE:
Surface preparation: The surface should be sound, clean, free of loose particles, dust, grease, chalk, fungus and mould. Remove fungus growth with Berger Bio-Wash, anti-fungal treatment or with a fungicide bleaching powder solution (2-5%). Clean surface by wire-brushing and wash with water. Cavities (up to 5 mm deep) in the substrate should be filled with Home Shield Crack Fill powder/paste and the substrate should be made uniform before the application of WeatherCoat Hi-Build.
Primers: The substrate should be primed with WeatherCoat Exterior Primer WT.
Method of Application :
Mosaic finish: Apply the prepared mixture by evenly spreading it on the substrate using a stainless steel trowel. Remove excess material to obtain aggregate size layer thickness and even surface with a short stainless steel float. Next, even out the plaster to a uniform thickness by running a flat stainless float in a single direction - top to bottom/left to right.
Stone and granite finish: Spray 1 or 2 layers of the prepared mixture/plaster using a spray gun (2-5 mm nozzle) at a constant pressure of 0.50 MPA. Care must be taken to spray the plaster diagonally to the wall from a distance of 30-40 cm in an even, continuous operation.
Top Coat: Apply 2 coats of WeatherCoat Acrylic Clear to increase longevity and avoid dust deposition.