Berger WeatherCoat exterior paint is formulated with special grade emulsions, light fast pigments, unique additives like anti-fungal, anti-foaming, anti-flaking, anti-fading, etc. In addition, it has the unique "one way barrier" which enables the paint film to breathe out moisture. USP: High sheen, withstands extreme weather conditions, resists fungal growth, high protection against alkali, UV degradation and water resistant properties because of the presence of silicon. Can reduce temperature upto 5°C by Infrared Ray Block Technology.
Usage area: On exterior plastered surfaces.
DIRECTIONS FOR USE: Surface preparation: For fresh/new surfaces, strip all the loose particles from the surface with wire brushing and by scraping, followed by a wipe down. Wash the surface down with water and allow it to dry. For better results, apply 1 or 2 coats of Berger Paints Bio-Wash solution (5% v/v) by brush (optional) and allow it to dry overnight. Wash it again the next day with potable water thoroughly. Allow the surface to dry fully. Apply one coat of primer and allow it to dry for 6 to 8 hours.
For previously painted surfaces: Strip all the old paint and remove all the loose particles before starting the above process.
Directions for Application: Dilute the paint as per the recommended dilution ratio. Apply the first finishing coat and allow it to dry for at least 6 to 8 hours. After the first coat dries, apply the second coat and allow it to dry overnight.