Heat Exchange and Boilers Buy Leads

We want heat transfer printing for 500 t shirts. Please send price quotation fro the same.

Kindly quote the best rates for hot air oven.

We are looking for Metallic recuperator for pre heating of combustion air to 300 to 350oC. >> Hot side tubes made of AISI 310 / 321 tubes, and Balance tubes made up of Boiler quality steel or....[+]

We are looking for Metallic recuperator for pre heating of combustion air to 300 to 350oC. >> Hot side tubes made of AISI 310 / 321 tubes, and Balance tubes made up of Boiler quality steel or carbon steel. >> Exhaust flue gas temperature around 700oC. Hot flue gas volume 5000 Nm3 /h. Combustion air volume to be preheated in the recuperator : 5000 Nm3 /h Please quote price for the same.[-]

We are looking for Boiler with capacity of 5 Ton with fire tube, saddle support, twin pass, diesel or LPG fired, supplying saturated steam at 165 Deg for the slop & sludge tank. Type: Fire Tube....[+]

We are looking for Boiler with capacity of 5 Ton with fire tube, saddle support, twin pass, diesel or LPG fired, supplying saturated steam at 165 Deg for the slop & sludge tank. Type: Fire Tube Fuel: LPG/Diesel Inlet Gas Temp: 9640C Boiler Feed water supply :3134 kg/hr. at 20 0C As stand by for the existing WHR Boiler. To get Saturated steam 165 0C >> Boiler, feed pump, saddle support without decelerator, piping upto main steam stop valve, drains to nearest drain trench, Mechanical Dust collector, ID fan with chimney, flue gas ducting (Prefabricated) . Kindly send quotation for the same.[-]

We need following galvanizing equipments for repairing our process equipments: 1. Zinc melt kettles : 02 units (different at height): + Inside dimensions : (LxWxH) : 15,000 x 850 x 1,100/1300....[+]

We need following galvanizing equipments for repairing our process equipments: 1. Zinc melt kettles : 02 units (different at height): + Inside dimensions : (LxWxH) : 15,000 x 850 x 1,100/1300 (mm) + Thickness : 50 mm, + Material : Low carbon and silica steel with : %C 0,06; %Si 0,01; %Mn 0,036; %Cu 0,046; %Al 0,025; %Sn 0,002; %S 0,005 and %P 0,01. 2. Zinc melt pump : 01 unit. + Type : Centrifugal or screw pump, + Capacity : About 5 HP, + Melt zinc height : About 4 netters, + Velocity : About 500 kg (zinc melt)/ minute. 3. Container to store melt zinc with heating system: 01 unit. + Capacity : About 10 m3, + The container keeps temperature for melt zinc at 430 oC 450oC. Kindly also intimate information & quotation for these (CIF Danang/HoChiMinh port).[-]

I am interested in induction furnace. Kindly quote for the same.

We are looking for Boiler Plate with following specifications: >> BS EN 10028 2P265 GH Plate 22mm thk x 1.5 mtr x 3 mtr. Please quote price for the same.

We are looking for Lean Gas Boiler H2 18 % Co 23 % Co2 9 % N2 50 % Capacity : 5 t/h steam with 50 Bars and 470 C. Kindly send quotation for the same.

We are seeking for melting and forging furnace for steel, alloy steel, stainless steel and tangestium capacity 150 Kg & 100 150 Kw Please send quote and CIF Alexandria prices for the same.

We are looking for low frequency heating plant. > Capacity increase in distribution transformer field 50 2500 Kva, 12 24 36 Kv. > Daily production 36 pcs and yearly 10000 pcs.....[+]

We are looking for low frequency heating plant. > Capacity increase in distribution transformer field 50 2500 Kva, 12 24 36 Kv. > Daily production 36 pcs and yearly 10000 pcs. transformers. Kindly quote for the same.[-]

We require an aluminum melting furnace system with a continuous output of 4.5 to 5 Kg per minute using oil and electricity as primary energy source with lip axis discharge. Please quote for the....[+]

We require an aluminum melting furnace system with a continuous output of 4.5 to 5 Kg per minute using oil and electricity as primary energy source with lip axis discharge. Please quote for the same.[-]