Tee Strainers provide economical permanent protection for pumps, valves, meters and other expensive mechanical equipment. These Strainers are available in Straight Flow or angle flow configurations which can easily he incorporated in to piping layouts.
The angle flow design can be used in place of a standard elbow since the nozzle connections are dimensionally identical. Units are available in 2". to 12" pipeline sizes in flanged or butt weld connections.
Series 600 ACP and SCP Strainer use a Cylindrical Strainer basket which provides a good amount of open area, up to 2 times the cross sectional pipe area, equivalent the Straining capacity of most full size line Strainers. This ensures low pressure drop and large holding capacity at a fraction of the cost of the full size line strainer. The Strainer basket is readily accessible for cleaning by removing a blind flange. Quick opening closures can also be provided.
Standard element material is perforated sheet having 3 Minimum hole , 5 mm triangular pitch. Smaller perforations or wire mesh liners. can also be made available for finer straining requirements. With perforated metal baskets flow can be in either direction. Where wire mesh liners are used, specify direction of flow that mesh is installed on upstream side of the perforated support.
Series 600 Strainers are available in any weld-able material and with most of the options and accessories shown.