Welcome to HelloTrade!
I Want to Buy
Request for Quote

16-Channel Input/Output Expansion Module

Next Product »
Yes! I am interested
FOB Price : Get Price

The SDM-IO16 expands the digital input and/or output capability of Campbell Scientific dataloggers. It offers similar functionality to the control ports of our CR10X and CR23X dataloggers. When configured as an input, each port can monitor logic state, count pulses, measure signal frequency, and determine duty cycle. The SDM-IO16 can also be programmed to send an interrupt signal to the datalogger when one or more input signals change state.

  • Provides 16 digital I/O ports
  • Input configuration options: Monitor logic state, count pulses, measure signal frequency, and determine duty cycle
  • Output configuration options: Port set to 0 or 5 V by datalogger or source current up to 100 mA
  • When driving loads, external power supply recommended
  • Requires Datalogger Instruction 188
  • Complies with EN61326:1997
  • Operating voltage: 9 to 18 Vdc
  • Current drain: 600 microamps typical standby (all ports high, no load, excludes pulse counting)
  • 3 microamps maximum (active will all 16 port counting pulses at 2 kHz and no output load)
  • Voltage (no load): ON/HI—nominal 5 V, minimum 4.5 V; OFF/LO—nominal 0 V, maximum 0.1 V
  • Source current: output will source 42 mA@ 3 V; 133 mA short-circuited to ground
  • Voltage: High—4.0 v minimum threshold, Low—1.0 V maximum threshold


Invalid Input
Please enter Mobile Number
Invalid Email ID
Invalid Email ID
Your Contact Information
Competitive Quotes
Choice of Suppliers
Payment Protection
sending enquiry ....

unable to instantiate your call right now. please try after some time.


©Copyright HelloTrade.com