Changshu Dongyu Insulated Compound Materials Co. Limited

Fiberglass Chopped Strand Mat is an unwoven consisting of randomly distributed chopped strands held together with a powder or emulsion binder. Chopped strand mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are widely used in hand lay-up process and can also be used in filament winding, compressing molding and continuous laminating processes. The typical end-use applications including various panels, tank, boats, FRP roofing sheet, Auto roof, bathroom equipment and cooling tower etc… General data Product code: EMC & CMC Glass type: E-glass or C-glass Bonder type: powder binder or emulsion binder Density: 80-900 g/m2. Usually is 225gsm / 300gsm / 450gsm / 600gsm Roll width: 200-2600mm usually is 750mm / 1040mm / 1250mm / 1270mm Roll weight: 28kgs-50kg Packing: Product is made in form of a roll wrapped on a paper tube, then packed in a plastic bag and then placed within a cardboard carton. Rolls can also be loaded in container directly or with pallets. Deposited: Chopped strand mat should be stored in dry, cool, clean and rainproof area. Recommend temperature is 15℃-30℃, and relative humidity 40%-70%.

Product code: EMC & CMC

Glass type: E-glass or C-glass

Bonder type: powder or emulsion Density: 80-900g/m2. Usually 225gsm / 300gsm / 450gsm / 600gsm

Roll width: 200-2600mm usually 750mm / 1040mm / 1250mm / 1270mm

Packing: Product is made in form of a roll wrapped on a paper tube, then packed in a plastic bag and then placed within a cardboard carton. Rolls can also be loaded in container directly or with pallets.

Storage: Product should be stored in dry, cool, clean and rainproof area. Recommend temperature is 15-30, and relative humidity 40%-70%.