All type of surface whether, it is concrete, steel or wood, and require protection against corrosive environment. To protect substrate against corrosive attack, it is recommended to apply anti-corrosive primer followed by further finish coats, screed lining or brick/tile lining. Bitumen Primer is most suitable primer to protect different type of sub-striate against atmospheric corrosion and chemical corrosion.
Area Of Application:
Bitumen primer can be applied on variety of substrate like steel, concrete, wood. To protect steel structure, tanks, pipes, girders, marine structure eitherexteriors or interiors. Bitumen primer is very widely used on concrete as a primer where further acid resisting brick/tile lining is recommended.
|Viscosity @ 25 C by Ford cup B4|
|Drying time @ 25 C.||1 hr.|
|Bonding to |
|Shelf Life (in sealed container |
Bitumen primer should be stored in properly sealed containers away from direct sun light,heat and flame. Reseal container after use.
25 Lts. 200 Lts. good quality MS container.
Health and Safety:
It is advisable to wear protective wears at the time of use of bitumen primer and all other bitumen primer products. In case of contact with eyes, clean with plenty of water and consult a doctor.This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.