Epoxy Mortar is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant bricks/tile, concrete, MS surface. Epoxy Mortar is resistant to very wide range of chemicals.
Area Of Application:
Due to very low absorption and very high chemical & physical properties MIPRO-E can be used for acid resisting brick/tile lining, on floors, drains, reaction & storage vessels, sumps, effluent treatment plants of food/pharmaceuticals, Breweries, Dairies, Water treatment plants etc.
|Mix Ratio by wt. Binder to |
|1: 3.75 to 4.5|
|Compressive Strength kg/cm2||500|
|Flexural Strength kg/cm2||150|
|Bond Strength kg/cm2||10|
|Max. Temp.||60 C|
|Setting Time Hours||8-10 hrs.|
After proper mixing, mortar should be buttered on back and sides of bricks/tiles to be laid. Apply little
more mortar and after lying squeeze the excess mortar. If only joints filling are done, be sure that full depth of joints is filled with mortar. There should not any air pocket in the joints. During & after completion of the installation, area must be kept dry and free from any other materials.
Epoxy Mortar is highly resistant to acids, alkalis, salts, solvents, greases, detergents etc. However it is not
recommended against strong mineral and oxidizing acids.
Storage & Shelf Life:
Always keep resin, hardener and powder in cool, dry place, away from direct sunlight and moisture. If stored in sealed containers and bag shelf life of Resin, Harder & Powder will be one year.
As required by customer.
Health & Safety:
In case of contact with eyes and skin, wash with plenty of water and consult a doctor. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.