Combustion & control systems Mumbai, Offering Alumina, Zirconia, Zta, Tungsten carbide, silicon carbide, Steatite, Titania, Cordierite, Zas, Mullite ceramics using modern production technology of spray drying, Dry & Wet bag isopressing, Hydrulic/ Mechanical compaction, Injection moulding, Extrusion, Green Machining, Diamond grinding, Lapping, Polishing, & Slip Casting.
A choke is used to control the flow of fluids and is usually mounted on or close to the christmas tree, High pressure gas/oil, with abrasive sand minerals passes through these chokes at high speed causing rapid wear. Bean chokes contain a replaceable insert, or bean, made from hardened steel /ceramic or stainless steel/ tungsten carbide or similar durable material. Combustion and control chokes are lined with a high hardness, abrasion and corrosion resistant 98.5% alumina or tungsten carbide liners to protect them from corrosive and abrasive wear.
Combustion & control chokes are exported all over the world like Europe, USA, BrazilL, UAE, and are their international standards & timely delivery. Combustion & control produce a complete range of choke beans to match OCT type FC140, ThronillCraver, Gray tool, Cameron, These are manufacturer with a precise diameter hole that forms the choke, through which all the abrasive/ corrosive fluids must pass. Combustion & control beans are available in diffrent sizes, generaly identified by the choke diameter stated in 64ths of an inch. For the orifice size less than 14/64" for more precise flow control, beans are offered in sizes of 10% increments(5% increments available between orifice sizes 6/64" and 14/64"). Combustion & control systems, Mumbai offers choke beans and hardened steel/ tungsten carbide stems for the above makes & other custom designed flanged positive chokes, flanged and threaded adjustable chokes and stems/seats.