Member
Since
4 Yrs

Como Oil And Propane

3700 East Lake Shore Drive
Ashland County, Wisconsin-54806, USA+(1)-(715)-6828880
Contact Supplier
tank manufacturers nameplate
FOB Price : Get Latest Price
A manufacturers nameplate is the one thing that identifies a propane tank as unique and also provides all pertinent information about that particular tank. The manufacturers nameplate serves several purposes, the primary being to identify the tank as a propane tank.
Send Enquiry
external pressure relief valve
FOB Price : Get Latest Price
Found primarily on older tanks, external relief valves operate in the same manner as an internal relief valve with the spring mechanism being outside the propane tank itself. Relief valves on multvalves are always fitted with external safety relief valves. Older tanks with an external relief valve installed on the container are generally replaced with internal pressure relief valves, provided they are connected to a dedicated tank opening specifically designed for the placement of the relief valve.
Send Enquiry
internal pressure relief valve
FOB Price : Get Latest Price
Most propane tanks in residential and commercial service have internal safety relief valves. The reason for an internal valve as opposed to an external pressure relief valve is it presents less of an obstruction when moving the tank. Internal relief valves are generally placed near the end of the propane tank on above ground containers.
Send Enquiry
underground propane tank regulators
FOB Price : Get Latest Price
Regulators installed on an underground propane tank are subject to different precautionary measures for proper protection, safety and continuous operation. Concerning all propane tank installations, regulator safety and protection is of the utmost importance. But when dealing with underground installations, regulator installation takes on a new set of standards and additional safeguards. According to NFPA 58, "the discharge of the regulator vent shall be above the highest probable water level".
Send Enquiry
propane relief valves
FOB Price : Get Latest Price
Relief valves are held in the closed position by the force of a powerful spring. As long as the pressure inside the tank is less than that of the spring, the valve will remain closed. If tank pressure rises to that of the spring, the valve will open resulting in a hissing sound outside the tank. If the pressure in the tank rises significantly higher than that of the spring, the valve will fully open. When the valve fully opens, it initially makes a loud pop followed by a blast of released propane gas. Once the pressure is released and the tank pressure falls below that of the spring, the valve closes.
Send Enquiry
understanding propane bleeder valves
FOB Price : Get Latest Price
The bleeder valve is designed so that during the filling process, when the propane going into the tank reaches 80%, liquid will come out of the opened valve. This lets the delivery driver know that the tank has reached its maximum filling capacity. The valve is connected to what is called a dip tube that goes into the container. The dip tube is fixed and set at length equal to 80% liquid level tank capacity. In other words, the tip of the dip tube is at the level equal to the container being 80% full. The dip tube itself should always be located in the vapor space and never submerged in liquid propane.
Send Enquiry
Liquid Withdrawal Valve
FOB Price : Get Latest Price
The liquid withdrawal valve is often known by its manufacturers given name such as Chek-Lok or Checkmate. However, the proper name is "actuated liquid withdrawal excess flow valve" and it serves a vital role in propane tank liquid evacuation. It also is used in other applications requiring the use of liquid propane.
Send Enquiry
Protecting Underground Tank Regulators
FOB Price : Get Latest Price
The protection of underground propane tank regulators is essential for safe and continuous operation downstream of the tank. When additional protection is needed, such as in areas where the tank is subject to collecting water during heavy rains, a simple vent pipe can be attached to the regulator's vent inlet. The vent extension allows the propane regulator to properly "breathe" in the event it becomes submerged in water. Regulator vent extensions are installed by licensed propane companies and professionals and should be attached at the time the tank is installed. Propane customers should contact their propane company to have a vent extension installed on their underground propane tank regulator if one is not in place but is needed.
Send Enquiry
Propane Tank Service Valve
FOB Price : Get Latest Price
The tank service valve is the point at which propane vapor enters the gas plumbing system for use by downstream LP Gas appliances. All ASME propane tanks have a service valve that functions as a primary shut-off device when used in vapor service systems. Proper operation of the service valve is important for safety reasons and gas utilization. If you smell propane in your house, the service valve should be turned off immediately!
Send Enquiry
Face Gauge Dial Gauge
FOB Price : Get Latest Price
The face gauge, often called the dial gauge is the part of the gauge assembly that is used to indicate the approximate level of liquid propane inside the tank.
Send Enquiry
Tank Float Gauge Assembly
FOB Price : Get Latest Price
The full float gauge assembly as pictured in its entirety. The float is visible at the top of the picture. The float rises and falls with the level of liquid propane in the tank.
Send Enquiry

RELATED CATALOGS
  • Cheap-Stir Industrial Mixers & Mixing Equipment Cheap-Stir Industrial Mixers has combined its 20-plus years of industrial mixing knowledge in the ...

    view details
  • Since 1971, Virginia Transformer Corp has enjoyed remarkable growth, often way beyond that of the industries and markets that we serve and we have ...

    view details
  • Howard Industries produces a wide range of quality products and services for global markets, including distribution and power products for utilities ...

    view details
 
Recommended Catalog

Jinan JCUT CNC Equipment Co., Ltd., lies in Jinan city, is a new technology enterprise which is specialized in developing and manufacturing ...

view details
Latest Events From USA

Event Date: 24 - 26 Apr 2015

Venue: Chicago, USA

Event Date: 24 - 25 Apr 2015

Venue: Tinley Park, USA

Event Date: 24 - 26 Apr 2015

Venue: Las Vegas, USA

Event Date: 24 - 26 Apr 2015

Venue: Timonium, USA

 
sending enquiry ....
Thank You

unable to instantiate your call right now. please try after some time.

close

© Copyright HelloTrade.com