This is Automatic Jumper-Link And Wire Forming Machine used in various area.
Model: JL - 20
- This is an automatic jumper linklwire forming machine capable of forming a right angle cut-and bend jumper-link and other wire forms with a pitch length size control spanning from 2mm to 40mm. (Other size range on request).
- The bare tinned-copper -wirelwire is de-reeled from the spool using a special De-reeling device and then fed to the wire straightner.
- The wire is straightened in two planes and then passed through the feed unit. The feed unit meters the wire length as per the jumper wire /size set on the feed unit. The wire is then conveyed to the cut & form die-module, which operates as soon as the desired length of wire has been fed to it.
- The machine is capable of forming 3500 jumper links/formed wire per hour. Change-over from one size to the other takes just two minutes. The universal tool-set caters to the entire range of pitch size from 2 to 25mm.
- The bend angle can be varied from 100 to 90 through adjustment of tools. The machine exercises a very tight tolerance of:!: 0.5% on the length of one of the bent legs/total lenght.