Electronic cone to cone winder RI with yarn guide designed to, rewind and wax yarn for industrial-sized and dyeing mills or small workshop.
Every type of yarn can be handled thanks to the extreme precisions of the traverse (6 or 8 inch), in particular finest and softest yarns by soft-start acceleration device and positive overfeeder. Normally, 13° and 16° degrees are available, but combinations of 11° and 14° and 15° and 18° can be accomplished by simply changing a pulley.
End product obtained is always of top quality especially for a soft dyeing package thanks to the two tension devices per each head.
Independent motors each head controlled by a frequency electronic inventer reach a speed of 800m./min. The speed control allows the yarn to be wound slowly at startup and then ramped up gradually in a five second acceleration mode to allow for the efficient winding of delicate yarns.
Machine outstanding for low noise, simple operation and mostly no maintenance required beside cleaning.
Optional devices available are meter counter, travelling cleaners and pneumatic splicers. The RI/4 winder can also be equipped with a “deknit” device that will unravel the fabric and put the yarn back onto cones.
This is Interesting for any mill knitting with expensive yarns, or to complete the production when there isn’t anymore yarn left and the only way is to recover it from a defective panel. This sensitive device allow to recover even fine yarn count such cashmere and wool as well, thanks to it’s adjustable leverage system we prevent yarns breakage.