- The best solution for warp threads cutting
- Top-level market compactness and economy.
In the case of fi l coupè, embroidery or jacquard, it is often necessary to cut and shear yarns that might be almost in the warp direction.
Until today, this phase has been carried out manually, as no machine for automatic processing existed.
Hence, this machine has the function of automatizing this phase by cutting warp yarns or other yarns with a direction almost parallel to the warp. The machine can be also equipped with cutting cylinders for weft yarns to be installed before or after the warp-cutting device, according to the structure of the fabric to be cut. By adding a Mario Crosta shearing machine to this machine, the result will be a perfect automatic system for cutting and shearing every type of yarn. Maximum machine height is 4000 mm.
Speed depends on fabric width and yarns length.
Modular construction system with touch-screen display to guide and assist the operator during each operation phase. Driving system with inverter-controlled three-phase motors, as well as independent impulse controls for each device. All processing parameters can be set both during machine standstill and while working.
Programmer able to record up to 600 work programs.
Besides, thanks to an air conditioner installed on the upper section of the electric control box, it is possible to keep the temperature constant and to avoid the formation of condensate, thus ensuring a long duration of all electric and electronic components.