Danntech Process Instrumentation

+ 5 v at 3 a, ±12/15 v at 250 ma. Ideal for powering microprocessor systems. Secondary switched design. Laboratory and educational applications. input: input voltage: 230 vac ±10%, 47-63 hz
nominal input current: 0. 2 a at 230 vac
mains input fuse: 1 a 250 v 20 x 5 mm output: output voltages: 5 v, ±12 v or 5 v ±15 v output current: 5 v 3 a, ±12/15 v 250 ma ripple: < 2% on all outputs current limit, typical: 4 a regulation: load regulation: < 2% from no load to full load protection and monitoring: internal fuse: 2 a 250 v 20 x 5 mm. current limit: protected against continuous short circuit on 5 v output,
fuse protected on ±12/15 v outputs. overvoltage protection: crowbar protection on 5 v output at 5. 7 v. good power led: good power indication on 5 v output at ±5% and ±10% on the ±12/15 v outputs. operational data: temperature range: 0 to +70°c with free convection. power derating: 2. 5%/k from +60°c. storage temperature: -25 to +85°c. burn-in: 72 hour full-load burn-in. mechanical data: dimensions: 235 x 110 x 65 mm
(l x w x h) weight: 0. 6 kg installation: chassis mounted. mounting position: horizontal. access: input cable and mains switch at rear, output connector and led at front. general: attractive, low-profile packaging. 1. 5 m mains cable supplied with internal screw terminal connection. high quality screw terminal plug-in connector for dc outputs. overload capability for short periods +12/15 v 500 ma and -12/15 v 300 ma. meets cispr14. 00
select currencyradiated and conducted noise emission specifications.

This compact DIN rail mounted power supply provides reliable, regulated and current limited DC power for many process control applications. The output is regulated to within 0.5% from no load to full load over the full input voltage range of 95 to 255 VAC. DC input voltages between 90 V and 350 V can also be used. Off-line switchmode power conversion ensures a compact, efficient and low noise DC output. Indefinite short circuit protection is provided at 1.4 A. An internal mains fuse and MOVs provide protection against power surges and spikes. The output voltage can be internally adjusted from 15 V to 25 V. Applications: Powering of process transmitters.
Providing a regulated DC supply to any equipment. Specifications: Output 24 V @ 1 A. Output noise less than 80 mV peak to peak at 24 V with 1.2 A load. Indefinite short circuit protection. Input voltage from 95 to 255 VAC 50/60 Hz or 90 to 350 VDC. Output power LED indication. Internal mains input fuse. MOVs across mains input. Operating temperature 0 to 55°C. Start-up time less than 70 mS. 24 hour operational burn-in. Plug-in screw terminal connections for both input and output. DIN rail mounting or optional panel mounting kit. SABS tested. Size 130 x 80 x 85 mm (W x H x D).