SPACER MESH DBM is specialised in manufacture and supply of spacer meshes used in double pipe exhaust systems. As results of their interlocking loop structure, DBM spacer meshes offer unique benefits in terms of protection against shock and vibration. Spacer mesh provide high performance and they can be fabricated from any kind of material in wire form and in different shapes and sizes according to customer's technical specifications and drawings. CERAMIC MONOLITH SUPPORTS, GAS SEALS Ceramic monolith supports are placed around the ceramic blocks in catalytic converters within the metal shell of the converter and the ceramic honeycomb to protect against vibration damage. We produce supports in material stainless steel 304, 310, 314,316 and inconel. Wire diameter between 0.12mm to 0.25mm. Mesh pattern, number of wire per stitch and compression details in accordance with customer requirements. The finished product has unique shaping and allow simple installation procedures good performance, vibration absorption and long service life. Gas mesh seals are positioned at the end of the ceramic brick to prevent gas leaking between ceramic and the metal shell. Material used stainless steel 304, 310, 314, 316, inconel. Gas mesh seal are usually round in section but can be made in a variety of shapes to fit the edge of the ceramic brick. Gas mesh seals are available in metal knitted mesh or ceramic rope braided with external knitted mesh single or double layer.