DYK RM 130
REPAIR MORTAR (Fine)
CONCRETE STRUCTURE FINE REPAIR MORTAR
DYK RM 130 REPAIR MORTAR is supplied in 25 kg bags (3 layers kraft, one layer polyethylene)
12 months in a dry place in original packing. Standard taking Size is maximum 8 folds stacking.
WHERE TO USE:
Repairing of cracked and deteriorated concrete structures on both vertical and horizontal surfaces, corners of pillars, beams and ceilings, edges of balconies. Smoothing surface defects, such as gravel nests, new casting joints, holes created by formwork spacers, exposed rods, etc. Filling of rigid joints. DYK RM 130 REPAIR MORTAR is for cracks from 1 to 5 mm wide. Repairing a surfaces need to be fine and smooth finishing.
DYK RM 130 REPAIR MORTAR is a grey powder composed of Portland cement, silica sand with special grain sizes, polymer and special additives added, high stability, ease of use, non toxic, high adhesion strength without primer according to a formula developed in the DYK research laboratories. Mixed with water, DYK RM 130 REPAIR MORTAR becomes an easily workable mortar that can be used on both horizontal and vertical surfaces for repairing. DYK RM 130 REPAIR MORTAR hardens without shrinkage and becomes perfectly smooth surface. Very high flexural and compressive strength. DYK RM 130 REPAIR MORTAR is rapid curing and crack free. When application done, DYK RM 130 REPAIR MORTAR viable between -20 °C and +80 °C. Repairs all concrete surfaces perfectly. Cool surfaces by dampening with water to which have become heated from exposure to sunlight and/or surface temperature is over +25 °C. Do not use below +5 °C. Do not add water after the mix has started to set. Protect installed surfaces from direct sunlight, wind, rain and freeze first 24 hours of application. DYK RM 130 REPAIR MORTAR resistant to water and freeze.