Eagle Connector Corporation

B-SERIES TERMINAL BLOCKS Eagle Connector B-Series terminal blocks were designed to provide reliable, versatile, and cost effective wire connectors in rugged industrial equipment and commercial appliance applications. The B-Series is used as a power connection point for loads up to 85 amps. The B-Series is also used in low power applications where large wire, as large as #4 AWG, is used to minimize voltage drop.

C-SERIES TERMINAL BLOCKS Eagle Connector C-Series terminal is a power input field wiring terminal block offered for commercial appliance and industrial equipment applications. The terminal block is a one-piece, dead front connector with color coded circuits. The C-Series is rated for loads up to 85 amps and for wire as large as #4 AWG. Large 3/8 inch diameter, screwdriver entry holes allow wire connections to be made with 1/4 inch flare point screwdrivers, the most common screwdriver size.

D-SERIES TERMINAL BLOCKS The Eagle Connector D-Series terminal block is a high current, 85 amp., yet compact sized terminal block. The D-Series is dead front, that is all live metal parts are recessed inside of the insulator block. The D-Series was designed for rugged industrial equipment and commercial appliance applications.

F-SERIES TERMINAL BLOCKS The Eagle Connector F-Series terminal block offers four 1/4? male quick connect tabs per circuit. The F-Series is ideal for commercial appliance applications providing safe, reliable connections yet allow quick service of appliance components. The F-Series offers a unique one piece connector design; no rivets or screws which could loosen causing heating or intermittent problems. The F-Series connector is completely enclosed by the insulator offering near dead-front safety.

G-SERIES TERMINAL BLOCKS Eagle Connector G-Series terminal block is a power/signal field wiring terminal block offered for commercial and industrial applications. Common applications are those where field wiring is on the outside of the device and factory wiring is enclosed within the device. The G-Series is rated for loads up to 25 amps and up to 600 volts. The large screw with captive sems wire clamping washers allow easy wiring even when terminating combinations of different wire sizes. The GT-Series allows insulated use thru metal device enclosures.