Molded Fiberglass Grating has historically been a hand lay-up composite of resin and continuous glass fiber strand that is thoroughly wet out and woven through an open mold. This method leads to a resinous composite which imparts good strength characteristics and high levels of corrosion resistance. The surface is typically a non-slip surface either resin textured or utilizing either embedded angular grit particles, or a glued on sanded surface. The embedded grit surface is both more slip resistant and imparts greater wear resistance than either of the other types. For these reasons embedded grit is more preferred.
Where you are concerned with safety due to liquids and oils on flooring, Molded Fiberglass Grating is the product for you. Our grating is also used in corrosive environments such as paper mills, chemical plants, circuit board shops and many other facilities where chemical corrosion and contact with the flooring cannot be avoided.