We are supplier of Powerblast 25 Shot Non Permitted Type Electronic Exploder. We fabricate the offered range using high quality raw material, which is sourced from reliable vendors.
Instruction for Use:
- Insert operating key and turn clockwise to 60, the Exploder will indicate "C" & then "F" starts flashing when full charge is attained. Press firing switch to explode
- Replace OR charge battery for 16 hours continuously when low battery indicator starts flashing
- The capacity of the Exploder may be tested by special powerblast Exploder tester.
- We are majorly looking queries from Africa, Australia and America.
Max. Circuit Resistance
160 Ohms with cable
Duration of Firing Current
< 4 ms at 160 Ohms Circuit Resistance
Continuity Sensing Voltage & Current
Open Circuit Voltage - 5 Volts
Short Circuit Current - 5 Ma Max.
AA Type Alkaline / NI-CD / NI-MH /LI-ION with minimum 700 Mah capacity. (6 Nos.)
-20 to +55 degree celsius
2 Kgs. Approx.