A Gimbal Expansion Joint can absorb angular deflection in any plane. It consists of two pairs of hinges connected to a common floating ring. Gimbal Expansion joint can consist of a single bellow, where there is no lateral deflection, or two bellows connected by a common connector where it can permit a lateral deflection also. The pairs of hinges, gimbal pin and the gimbal floating rings should be designed to restrain the pressure thrust.
- Permits angular movement in any plane.
- Gimbal pins are designed to withstand the pressure thrust, so the load on the anchors is reduced.
- Prevent torsional movement of expansion joint as the two pairs of the hinge pins are connected to the gimbal ring.
- Reduced forces on the piping system and main anchors.
- Resists extraneous forces created form wind loads, piping loads, dead weight of the machinery, etc.