Welcome to HelloTrade!
I Want to Buy
Request for Quote
Member
Since
3 Yrs
No. 900 / 2 B, G. I. D. C., Makarpura, Near Pakona Engineering
Vadodara, Gujarat-390010, India+(91)-265-2636795
Contact Supplier

Water Flow Meter

Next Product »
Yes! I am interested
FOB Price : Get Price

ADDMAS full bore meter is a cost effective flow meter for conductive liquids such as Raw Water, effluents, Potable water and industrial chemical. Using time proven electromagnetic flow metering principle, ADDMAS flow meters are available for pipes from ½” NB to 6” NB. Since there are no moving parts, the flow meter gives years of maintenance free service. Its performance is independence of temperature, pressure, density and viscosity of medium. The Water Flow Meter is obstruction less and hence the pressure drop is almost negligible. ADDMAS has all the features required in field mountable metering equipment. These include-weather proof / flame proof enclosure, RS485 communication option , with 4 to 20 mA isolated Current output for Flow signal transmission option for process control. The converter is available as field mounted – IP65 protection category. An optional batching controller also available on request.It works on Faraday’s Law of Electromagnetic induction. A magnetic field is generated by magnetic coil. The fluid flowing through this magnetic field generates EMF (Voltage) which is proportional to the flow velocity. This EMF is measured by the Electrodes giving corresponding output. Used for precision measurement of any conducting liquid or slurry that is flowing in closed pipes.

  • High Accuracy flow metering
  • Optional Digital Transmission
  • 2 Line Alpha numeric back lit display
  • No pressure drops in process.
  • Line size 15 NB to 300 NB
  • Accuracy = 1% of reading
  • Flow range 0.5 to 10 m/s
  • Easy maintenance as no moving parts
  • Min.conductivity : 5 us/cm
  • Output :4-20 ma,Relay and RS485
  • Protection : Cast Aluminum lP65 field / wall mounted
  • Process Temp: + 150 degree max.
  • Lining : PTFE / Rubber / PP

Water Flow Meter

Water Flow Meter

Get Quotes
Yes! I am interested
FOB Price : Get Price

Description

FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle

This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail

Nominal Dia (mm) : 15 to 400

Material of Construction : MS, SS 304, SS 316 & SS 316L

Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

Process Pressure : Max. 25 kg/cm2

Process Temperature : Max. 150C

Flow Tube Material : SS 316

End Connection : Flange/Wafer

Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

Accuracy : ± 1% FSD Optional: ±0.5% FSD.

Repeatability : 0.3%

Display : 2 Line Alfa Numeric LCD

Display Version : Integral /Remote

Display Unit : Standard Unit in M3, Litre

Power Supply : 230 VAC, 110 VAC & 24 VDC

Output : Std. 4 – 20 mA

Protection Class for Sensor : IP 65

Protection Class for Transmitter : IP 65

Cable Length for Remote : 10 meters.

Installation : Inline Flange Type

Water Flow Meter

Water Flow Meter

Get Quotes
Yes! I am interested
FOB Price : Get Price

Description

FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle

This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail

Nominal Dia (mm) : 15 to 400

Material of Construction : MS, SS 304, SS 316 & SS 316L

Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

Process Pressure : Max. 25 kg/cm2

Process Temperature : Max. 150C

Flow Tube Material : SS 316

End Connection : Flange/Wafer

Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

Accuracy : ± 1% FSD Optional: ±0.5% FSD.

Repeatability : 0.3%

Display : 2 Line Alfa Numeric LCD

Display Version : Integral /Remote

Display Unit : Standard Unit in M3, Litre

Power Supply : 230 VAC, 110 VAC & 24 VDC

Output : Std. 4 – 20 mA

Protection Class for Sensor : IP 65

Protection Class for Transmitter : IP 65

Cable Length for Remote : 10 meters.

Installation : Inline Flange Type


    RELATED PRODUCTS
     
    X

    Invalid Input
    Please enter Mobile Number
    Invalid Email ID
    Invalid Email ID
    Your Contact Information
    Convenient
    Competitive Quotes
    Choice of Suppliers
    Payment Protection
     
    sending enquiry ....

    unable to instantiate your call right now. please try after some time.

    close

    ©Copyright HelloTrade.com