Ferri slope mowers are designed to mow behind the tractor, and can also be offset to reach out and down a bank. These are truly versatile machines for mowing roadsides, ditch banks, orchards, and even hedge rows.
The ZMT mower is designed to go on a Category 2 three point hitch tractor. Minimum tractor horsepower is 50, and minimum tractor weight is 4900 pounds. The tractor weight is an important factor to consider before hooking up a slope mower. Tractor stability is critical when the mower is fully offset, and the flail head is off the ground.
The ZMT has a hammer blade option that will handle twigs and brush up to 2" in diameter. Most of the ZMT mowers that we sell are fitted with the hammer blade. This blade does an excellent job of grass cutting as well as brush shredding. The standard Y-flail handles material up to 1" diameter. The prices shown below are for ZMT models fitted with hammer blades. ZMT mowers fitted with Y-flails are slightly cheaper.
ZMT-E models are designed to offset farther than the standard ZMT. Keep in mind that ZMT-E models will not be able to mow directly behind the tractor; they will always be slightly offset. For full specifications please download the spec sheet from the Resource section of the web site.
Hobart Model A-200-F Mixer, 20 quart capacity, Sanitary Stainless Steel Construction, hand operated lift, driven by 1/3 Hp., 1/60/ 115 volt motor, 3- ...H & P Equipment Co., Inc.
Barchip F is a high performance, mono filament, polypropylene fiber used for controlling cracks in cementitious materials. It is used to inhibit the ...Sdg Construction Technology Limited
Aurora is a family of decorative luminaires designed for public areas. Consisting of pendant, ceiling, table and floor luminaires with the same basic ...Glamox Luxo Group
sending enquiry ....