Fuhr Industrial

Heritage Wiping Stain, 106 is heavy bodied and slow drying. This product is Fuhr’s slowest drying stain and is used for products that need an extended open time. 106 is formulated with pigments, and can be used for both interior and exterior applications. Application Method 1. Prep. Sand
180-220 grit Aluminum Oxide Sand paper

2. Condition (Optional)
Use product 155 clear as a conditioner to minimize blotchiness or uneven stain absorption.

3. Apply Stain
Apply 106 stain until the entire surface is wet.

4. Wipe
Wipe the stained surface with a clean bleached cotton cloth in the direction of the grain to obtain grain clarity.

5. Seal and Glaze (optional)
After the stain has dried completely, apply a sealer and topcoat. For an antique effect, apply Fuhr 195 Glaze after applying a seal coat.

Universal Stain, 155 has a low viscosity and is fast drying. This product can be sprayed easily, and then left for drying. 155 is typically used in high production manufacturing facilities. It can be formulated for both interior and exterior applications. Application Method 1. Prep. Sand
180-220 it Aluminum Oxide Sand paper

2. Condition (Optional)
Use product 155 clear as a conditioner to minimize blotchiness or uneven stain absorption.

3. Apply Stain
Apply 155 stain until the entire surface is wet.

4. Wipe (optional)
Wipe the stained surface with a clean bleached cotton cloth in the direction of the grain to obtain grain clarity.

5. Seal and Glaze (optional)
After the stain has dried completely, apply a sealer and topcoat. For an antique effect, apply Fuhr 195 Glaze after applying a seal coat.

Universal Wiping Stain, 165 has a low viscosity and is slow drying. This product can be sprayed easily, and then wiped with a rag for enhanced grain definition. 165 has a working time of 10-30 minutes depending on the application method. It can be formulated for both interior Application Method 1. Prep. Sand
180-220 grit Aluminum Oxide Sand paper

2. Condition (Optional)
Use product 155 clear as a conditioner to minimize blotchiness or uneven stain absorption.

3. Apply Stain
Apply 165 stain until the entire surface is wet.

4. Wipe
Wipe the stained surface with a clean bleached cotton cloth in the direction of the grain to obtain grain clarity.

5. Seal and Glaze (optional)
After the stain has dried completely, apply a sealer and topcoat. For an antique effect, apply Fuhr 195 Glaze after applying a seal coat.

Wiping Stain, 105 is a heavier bodied stain, yet still has fast drying properties. This product can be used for small to medium sized wood products where a wiping stain is necessary. 105 can be formulated for both interior and exterior applications. Application Method 1. Prep. Sand
180-220 grit Aluminum Oxide Sand paper

2. Condition (Optional)
Use product 155 clear as a conditioner to minimize blotchiness or uneven stain absorption.

3. Apply Stain
Apply 105 stain until the entire surface is wet.

4. Wipe
Wipe the stained surface with a clean bleached cotton cloth in the direction of the grain to obtain grain clarity.

5. Seal and Glaze (optional)
After the stain has dried completely, apply a sealer and topcoat. For an antique effect, apply Fuhr 195 Glaze after applying a seal coat.