The F600S UV lamp system is a product of Fusion UV Systems’
continued commitment to the development of new and improved
ultraviolet curing systems that meet today’s growing demands for higher
production speeds, increased profitability, enhanced reliability, and new
UV curing applications.
A modular 10-inch lamp system, the F600S system increases UV
output from previous system benchmarks of 300 to 400 watts/inch
to 600 watts/inch, with no reduction of warranted bulb life. This higher
power output increases UV curing effectiveness, depending upon the
particular materials employed in the process. The system’s increased
power stems from a number of technical enhancements to the I600M
irradiator and the P600M power supply.
The P600M power supply is powerful as well as intelligent, thanks to
the addition of microprocessor control. In operation, a liquid crystal
display offers continuous status updates as well as instant system
diagnostic information.Irradiators can be placed end-to-end to create a lamp system of
almost any length, providing high uniformity for wide applications.
Fast UV Curing from High Peak
Irradiance and Low Infrared
The small diameter bulb combined with the elliptical reflector
provides high peak of UV irradiance for high-speed cure. The
small diameter bulb also reduces infrared emission resulting in
lower surface temperatures of the substrate, thus eliminating the
need for complicated heat removal methods.
Popular Bulb Spectra Available
The standard bulb spectra are available: “H” spectral
distribution is suited for clearcoats and varnishes; the “D”
spectral distribution is popular and proven for inks and thick
coatings or adhesives; and the “V” distribution is effective in the
UV curing of white basecoats, through laminating materials and
in other specialty applications.
• Electrodeless technology enables frequent on/off operations
that have no adverse effect on UV output or bulb lifetime.
Bulb also maintains spectral consistency throughout its life.
• A focused elliptical reflector concentrates maximum UV
energy on substrate.
• Positive air cooling pushes air, supplied by a remote blower,
through the reflector and over the bulbs. This means that
bulb and reflector are always being cooled with clean air.
• Engineered modular design means modules can be
placed end-to-end for uniform
cure, and controlled
individually or together.
Irradiator Model I600M
Lamp Power (input):
• Full power: 600 w/inch (240 w/cm);
6000 watts total.
• Low power: 400 w/inch (160 w/cm);
4000 watts total.
Dimensions: 16.9" (429 mm) high x 8.2" (208 mm)
wide x 10.5" (267 mm) long.
Weight: 39 lbs. (17.8 kg).
Cooling: Minimum 315 scfm (8.9 m3/min) of
filtered air at 11.0" water gauge (2.75 kPa) at
the inlet (6.4" wg, 1.6 kPa inside the irradiator
housing). Supplied by external blower.
Reflector Geometry: Elliptical. Focus 2.1" (53 mm)
from irradiator face.
Substrate Location: 2.1" (53 mm) from irradiator face
for maximum irradiance.
Mounting Position: Irradiator can be placed end-toend
to create a lamp of almost any length. Operates in
Footprint: (mechanical) 10.5" (267 mm) x
8.2" (206 mm).
Light Shield: Available upon request to customer