Member
Since
3
Yrs
Gar Products
170 Lehigh Avenue
Lakewood, Colorado-08701, USA
Next Product

Table Tops

  • GAR Products® offer 1-1/4" thick, eased corner, Aluminum "T" Edge tops.
  • All tops are manufactured with a high pressure, horizontal grade laminate (specified by the customer) bonded to 45 lb. high density particle board with a phenolic backing sheet.
  • All tops are standard with a stylish aluminum "T" edge.
  • 3" radius corners standard. Larger radii available.
  • Please note that all colors pictured in product images, finishes and materials may vary from their actual color
Table Tops
  • Please note that all colors pictured in product images, finishes and materials may vary from their actual color
  • Padded Tops will help to eliminate clatter of china, stemware and silverware, offering your customer a quiet and fine dining experience.
  • GAR Products® Padded tops are made standard on particle board.
  • If plywood substrate is required, please contact the factory for special pricing.
Table Tops
  • Banquet Tops are available in stained plywood or laminated, walnut finishes.
  • All stained plywood tops are standard with aluminum "T" edges.
  • All laminated tops are standard with black "T" mold edges.
  • Tops are available in rectangular, oval, round and serpentine shapes, all with collapsible, locking legs.
  • For the customer's convenience GAR Products® offers a Banquet Carrier to assist in set-up and transport of the Banquet tops.
  • Custom banquet tops available as Special Order.
Table Tops
  • Please note that all colors pictured in product images, finishes and materials may vary from their actual color
  • The Craftsman Table is available in solid Oak, Ash or Maple wood species with a laminate inlay.
  • The Craftsman table is standard with a Straight Edge as shown above.
  • All laminates must be specified by the customer.
  • The square, stainless steel footrest offers style and protection against normal wear.
Table Tops
  • Please note that all colors pictured in product images, finishes and materials may vary from their actual color
  • Solid Plank Wood Table Tops are available in either Oak or Maple wood species.
  • Plank tops are constructed with equal length, random width, solid wood planks laid edge to edge.
  • Plank tops have an extremely durable catalyzed conversion finish.
Table Tops
  • Solid Butcher Block Table Tops are available in either Oak or Maple wood species.
  • Butcher Block tops are constructed with uniform widths of solid wood, back to back in either a random or continuos pattern.
  • Butcher Block tops have an extremely durable catalyzed conversion finish.
  • A filled finish and custom stain available
Table Tops
  • Permabond Table Tops are constructed with a durable polyurethane molded edge and laminate bonded to high density particle board.
  • All laminates must be specified by the customer.
  • All colors are stable when exposed to high levels of UV light and are chemical and impact resistant.
  • Permabond tops are standard with four 1-1/2” radius corners, a Bull Nose profile and a wide selection of standard and premium colors.
Table Tops
  • GAR Products® offers a variety of Wood Edge table tops
  • Mitered, solid wood edges are available in Oak, Ash or Maple wood species
  • Please note the grains of these species vary slightly from European Beechwood which is used for all GAR Products® wood seating
  • Each top is manufactured with a high pressure, horizontal grade laminate or wood veneer (specified by the customer) bonded to 45 lb high density particle board with a phenolic backing sheet
Table Tops
  • GAR Products® offers 1 1/4" eased corner Aluminum edged tops in multiple styles/finishes.
  • All tops are manufactured with a high pressure, horizontal grade laminate or veneer as specified bonded to a 45 lb. high density particle board with a phenolic backing sheet.
  • All tops are standard with 3" radius corners unless specified by customer and approved by factory.
More - Table Tops
Send Enquiry
Your Contact Details




 
 
 
 
 
Recommended Product
 
 

sending enquiry
Thank You

unable to instantiate your call right now. please try after some time.

close

© Copyright HelloTrade.com
Home | About Us | Partner with us | Disclaimer | Testimonial | Feedback & Complaint | Help